turbo si

well i got the turbo in and all was good till exhuast
started to cume out of the valv cover and running bad wtf is up rings /headgasket ?


my setup
1999 b18b
gsr tranny lsd
255 Walbro Fuel Pump
Custom Greddy TD05H-18G Complete Turbo Kit .
310cc injectors
Turbosmart Super Sonic Blow-Off Valve
Turbo XS Manual Boost Controller
Greddy Large Front Mount Intercooler
Stewart Warner Boost Gauge
Stewart Warner EGT Gauge w/ probe
Dual Cluster Gauge Pod
HKS Turbo Timer
P75 Chipped ECU and dyno-tuned
bully #4 puck cluch
3" Full Cat-Back Exhaust

0b00st0

It's probably blow-by from cracked ringlands, hole in the piston, or very worn rings.

93hatchturbo

The "ceramic coated cast iron exhaust manifold and cast iron elbows" along with "custom gunmetal color matched mandral bent piping" really aids in helping us trouble shoot your problems.

low_pt

I'd start with taking off the valve cover. You could have a valve stuck open or a busted spring / lifter / bucket / finger follower / however your cam actuates the valves.

Could be the valve stems too, or you might be getting blow by, in chich case you would need new rings.

whiterice

compression test.

0b00st0

None of those things will cause this.

turbo si

lol ya fixed thanks

its smoking bad and not running good i was onley at 6 psi but i can hear the valves radel

turbo si

all the spark plugs are good but num 4 is wet with oil and gas

joebowlr21

compression test an leak down test.....if everything checks out good adjust ur valves an see if the noise is still there....

turbo si

was running good on the hw then started to radle then smoking bad then no power ill do a compression test and pull off the valv cover at work tom thanks