HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   exhaust wheel touching housing. (https://www.homemadeturbo.com/forced-induction-7/exhaust-wheel-touching-housing-47914/)

-SphiNx- 10-12-2005 07:09 PM

exhaust wheel touching housing.
 
i got a td05, but the exhaust wheel is JUST touching the housing.. enough to hear is scraping when turning it.. can i just leave it and let it wear down or what.

cheers.

Random Hero 10-12-2005 07:33 PM

Re: exhaust wheel touching housing.
 
You could try it, but chances are that its going to smoke alot. :3 good luck

-SphiNx- 10-12-2005 07:39 PM

Re: exhaust wheel touching housing.
 
the turbs in is good nick.. no play etc. just the exhaust housin is cracked abit so has obviosuly moved. quite hard to find 14b td05 housings in good nick

darksol2005 10-12-2005 07:45 PM

Re: exhaust wheel touching housing.
 
if it's cracked like you said, i'm guessing the crack is bulging out and hitting the wheel. right?? if so, if you REALLY want to use that turbo, just pull the exhaust housing off and take a die grinder to the bulged area a little bit

djfob 10-12-2005 08:29 PM

Re: exhaust wheel touching housing.
 
eventually it'll throw the wheel out of balance

bumblezc 10-12-2005 09:24 PM

Re: exhaust wheel touching housing.
 
I wouldn't run it. I bought a turbo, Seemed like it was fine. Could hear scrapping, but not see it, pulled the housing off and it looked like half the wheel profile was gone!

myshtern 10-12-2005 11:15 PM

Re: exhaust wheel touching housing.
 

Originally Posted by darksol2005
if it's cracked like you said, i'm guessing the crack is bulging out and hitting the wheel. right?? if so, if you REALLY want to use that turbo, just pull the exhaust housing off and take a die grinder to the bulged area a little bit

do that


All times are GMT -5. The time now is 06:43 PM.


© 2024 MH Sub I, LLC dba Internet Brands