EG Fog lights vs. Intercooler Piping
I want to keep my OEM fogs on my EG.....is there anyway I can route the piping to do this?
|
Re:EG Fog lights vs. Intercooler Piping
Really depends on how the intercooler is setup, what do you have?
|
Re:EG Fog lights vs. Intercooler Piping
Well nothing yet.....but since I am only going to run 8 psi or so I'll get a smaller IC.....maybe 16-18'' core size
|
Re:EG Fog lights vs. Intercooler Piping
I've seen a couple EG running a FMIC with the factory fogs. Depending on your setup you should be able to work around them.
|
Re:EG Fog lights vs. Intercooler Piping
With a smaller fmic it would work but with something about the size CCA cooler I doubt you could keep the fogs.
|
Re:EG Fog lights vs. Intercooler Piping
If you could route your pipes without going around the frame of the car, you could do it.
|
Re:EG Fog lights vs. Intercooler Piping
Originally Posted by Cray91
If you could route your pipes without going around the frame of the car, you could do it.
|
Re:EG Fog lights vs. Intercooler Piping
flip the intercooler upside down, making the in/out of the intercooler on the top.
|
Re:EG Fog lights vs. Intercooler Piping
Originally Posted by whiterice
Originally Posted by Cray91
If you could route your pipes without going around the frame of the car, you could do it.
|
Re:EG Fog lights vs. Intercooler Piping
As someone said above it's very difficult with something like a CCA intercooler; unless you get very creative with your charge piping. Lots of bends. Hope you like to weld.
|
All times are GMT -5. The time now is 05:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands