ebay turbo customization
i was wondering if it was possible and how well it would work. to take the 'ebay' 57trim hot side and mate it to the 'ebay's' "t70" 61mm compressor housing.
57trim = 150 shipped "t70" = ~200 shipped total = 350 +/- w/e else i would need. not a bad price for a new 61mm turbo. |
Re: ebay turbo customization
Originally Posted by one2many
TOTAL garbage !!!!
|
Re: ebay turbo customization
It'd be easy, wouldn't even have to unbolt them. Just pull them apart and the glue will give way. Go die
|
Re: ebay turbo customization
dp's are a total ----. turbos are good as far as i know. i used a few of them.
not much porn on this comp but here is a great site....nevermind, it has some gay porn but enough hot ---- to overcome its gay side. haha lmk if anyone wants the link. |
Re: ebay turbo customization
Originally Posted by QikEnuF
It'd be easy, wouldn't even have to unbolt them. Just pull them apart and the glue will give way. Go die
im asking a legit question here no need to flame. :-\ |
Re: ebay turbo customization
Originally Posted by one2many
it has some gay porn but enough hot ---- to overcome its gay side. haha lmk if anyone wants the link.
|
Re: ebay turbo customization
omg. are you kidding me ? thats the reason i didnt post the link. ---- you are stupid. :1
|
Re: ebay turbo customization
Because you even considered it... ban.
|
Re: ebay turbo customization
they are not the same turbos and the housings will not swap.
the t70 wheel is WAY to big and you will have about a 1/4" of material from the small turbos hot side that you will need to have machined out. so add in another $150+ for machine work. at this point just buy a REAL damn turbo |
Re: ebay turbo customization
Originally Posted by one2many
dp's are a total ----. turbos are good as far as i know. i used a few of them.
The .57 trim clones do okay at single digit psi, but come apart when you push to or past 300 whp. T70 = immediate failure, under 1000 miles and usually under 500. T70 is based off of K26/K27 design with a ------- wierd milled-down T4-esque but not swappable with anything else turbine housing, where the .57 trim clones almost resemble Garretts. You can't ever get the two to bolt together, but that's okay because:
Originally Posted by QikEnuF
It'd be easy, wouldn't even have to unbolt them. Just pull them apart and the glue will give way. Go die
Now go declare bankruptcy and quit posting bullshit. |
Re: ebay turbo customization
lol, smart ass. thanks for the info on the t70. but the ebay 57 trim has been pushed to 28+psi and still holding. O0
http://www.youtube.com/watch?v=azwzEghDX8U |
Re: ebay turbo customization
Not to call BS, but a car running on the dyno doesn't mean it makes 442whp. And that is raping the t3/t4 to its limits, so I'm calling bullshit.
|
Re: ebay turbo customization
Originally Posted by one2many
lol, smart ass. thanks for the info on the t70. but the ebay 57 trim has been pushed to 28+psi and still holding. O0
http://www.youtube.com/watch?v=azwzEghDX8U Further, at no point does the poster of that video say he has an eBay aka SSAC aka chinese failure turbo. I will make a point of logging into youtube and asking him, though. |
Re: ebay turbo customization
::) |
Re: ebay turbo customization
no cdm turbos are any good
/thread |
Re: ebay turbo customization
Originally Posted by QikEnuF
Not to call BS, but a car running on the dyno doesn't mean it makes 442whp. And that is raping the t3/t4 to its limits, so I'm calling bullshit.
jd, maybe its just your tuning that kills the turbos. :P |
Re: ebay turbo customization
Maybe I stick my fist in your face if I ever meet you?
(3:22 PM 11/19/2007) JFK78: Yeah, well this one did eventually start pushing oil past the seals. Thrust washer was worn, so we are rebuilding it. Luckily we caught it before the compressor wheel contacted the housing. We recently put another one on the car and it couldn't make more than 25psi of pressure (29-30psi on the old one) and the tune was wayyy rich up top (to the point of misfiring badly) |
Re: ebay turbo customization
/Thread
|
Re: ebay turbo customization
Originally Posted by Joseph Davis
Maybe I stick my fist in your face if I ever meet you?
|
All times are GMT -5. The time now is 02:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands