Integra94

I bought Ebay type S BOV for my turbo setup because I got piping with type s flange. Can anyone tell me more about them, if any of you used them. Do they sound the same as real Type S? SHould I use it or buy new real one? ALso I read alot of info on them about 2 springs that are inside. Does the smaller spring need to be removed to make it softer or keep the both springs in? If anyone can help me with some information that would be great. Thanks alot. By the way this will go on B18b with 11psi.

ifly87

The ebay versions are identical to the real greddy ones, leave the spring in, only take it out if you have to, most people dont.

SpankedYA!

I had to remove the larger spring and then adjust the bonnet.

Integra94

Yea, i heard 2 springs make it too stiff, so they usually remove one to make it softer. What about that RFL bov?

igotnothin

is the type rs the same thing. i have a ebay nock off of one of them

Integra94

I have Type S, type rs is different. Hows that bov working for you?

ifly87

internally I believe they are similar, just that the rs costs a little more and looks all "shnazzy". I tried with one spring out and it was too soft so I put it back in.

igotnothin

i have not used the rs yet. i also have a nock off hks ssqv. wich one would be beter for 15 psi. the rs,s or the hks

Integra94

All of them should be fine. Im trying to get RFL now, i heard they are good. WHat about Ebay RFL?

igotnothin

dont know. get one of eachand run 3 bovs. why not