Dynoed and weighed b16 crx
08-02-2008, 09:29 PM
#1
0.5 BAR
Thread Starter
Join Date: Jun 2008
Posts: 80
Dynoed and weighed b16 crx
Buddy of mine got the dyno in his shop up and running so we decided to dyno my car since its been 8 months since i last dynoed.
original numbers were 309 and 207 these were made on blue ridge motorsports moble dyno
new numbers are 294hp and 212 tq. made on a brand new dynojet
no new modifications cept a b16 tranny. car was tuned by JD a/f looked good a hair on the rich side up in boost.
Also weighed the car which is what i really wanted to do
car is an 88 si fully gutted custom bumper support, aluminum racing seat. still had the stock passenger seat and a half tank of gas
car weighs 1993, and my fat *** weighs 182. which put the race weight at 2175. im bout to pick up a rear lexan hatch to get rid of the glass, delete the sun roof and get rid of the passenger seat might see a good 70-80 pounds less.
graphs are being emailed to me ill post them as soon as i get them
Ginger kids Rule!!
and we got a little bored afterwards, and this is what you get when your car has a shitty spray paint job...
i've got the slicks and skinnies just waiting here so in the next week or so we'll have some numbers at the local 1/8 drag strip
any predictions? im curious
original numbers were 309 and 207 these were made on blue ridge motorsports moble dyno
new numbers are 294hp and 212 tq. made on a brand new dynojet
no new modifications cept a b16 tranny. car was tuned by JD a/f looked good a hair on the rich side up in boost.
Also weighed the car which is what i really wanted to do
car is an 88 si fully gutted custom bumper support, aluminum racing seat. still had the stock passenger seat and a half tank of gas
car weighs 1993, and my fat *** weighs 182. which put the race weight at 2175. im bout to pick up a rear lexan hatch to get rid of the glass, delete the sun roof and get rid of the passenger seat might see a good 70-80 pounds less.
graphs are being emailed to me ill post them as soon as i get them
Ginger kids Rule!!
and we got a little bored afterwards, and this is what you get when your car has a shitty spray paint job...
i've got the slicks and skinnies just waiting here so in the next week or so we'll have some numbers at the local 1/8 drag strip
any predictions? im curious
08-03-2008, 10:50 PM
#10
0.0 BAR
Join Date: Jan 2008
Posts: 0
Re: Dynoed and weighed b16 crx
my crx weighed 1880 last time i weighed it.
now i have the same rims as you and the difference in wheel weight would put me at just over 1800.
like 1805 lbs
i have a fully gutted 90 hf, stock bumper, dohc zc, turbo setup, and some oc on the floor...
oh this was with just under 3/4 tank.
i am about 230 lbs.
i have not dyno'd my ----, but a safe estimate is 210 at the wheels @10 psi
oh and btw your ---- is not fully gutted.
you still have door panels and a dashboard.
on a side note you have the same steering wheel as me
now i have the same rims as you and the difference in wheel weight would put me at just over 1800.
like 1805 lbs
i have a fully gutted 90 hf, stock bumper, dohc zc, turbo setup, and some oc on the floor...
oh this was with just under 3/4 tank.
i am about 230 lbs.
i have not dyno'd my ----, but a safe estimate is 210 at the wheels @10 psi
oh and btw your ---- is not fully gutted.
you still have door panels and a dashboard.
on a side note you have the same steering wheel as me
