HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Dyno'ed the Miata (https://www.homemadeturbo.com/forced-induction-7/dynoed-miata-93243/)

idiot-stick 07-02-2008 10:14 AM

Dyno'ed the Miata
 
96 miata
stock internals
14b, homemade piping and manifold and 2.5" exhaust
460cc's
AEM F/IC
12-13ish PSI


Dynomite dyno.

With 15% correction to make it read like a dynojet would have which seems to be the net standard so...

http://img337.imageshack.us/img337/7...o2largeas8.jpg

datalog
http://img372.imageshack.us/img372/3157/dynologxk8.gif

2GeclipseRST 07-02-2008 10:54 AM

Re: Dyno'ed the Miata
 
The real question is:

Can you drift it?

HMTguy 07-02-2008 10:57 AM

Re: Dyno'ed the Miata
 
That's awesome, I'll bet it's a blast to drive. What's the stock HP?

idiot-stick 07-02-2008 11:00 AM

Re: Dyno'ed the Miata
 
I aint tried drifting it much but from what I've been able to come up with is it's no-where near as easy to drift as an S-chassis. It does have an LSD though which is nice :)

It's pretty damn fun. 14b spools up like a mofo. Stock 1.8's dyno at about 105whp.

Dive_Miguel 07-02-2008 02:28 PM

Re: Dyno'ed the Miata
 
Did you tune the AEM F/ic? Was it difficult? Great results btw. Got any pics of the finished setup?

idiot-stick 07-02-2008 02:59 PM

Re: Dyno'ed the Miata
 

Originally Posted by Dive_Miguel
Did you tune the AEM F/ic? Was it difficult? Great results btw. Got any pics of the finished setup?

yeah I tuned it. A little here, a little there. Wasnt difficult at all. It's a piggyback so basically just put in your injector correction, throw a ton of fuel at it then start taking fuel away where its too rich.

Here's the best recent pic I got. Took it last week when I upgraded to COP.

http://img255.imageshack.us/img255/5...57largerk9.jpg

spekter 07-02-2008 08:13 PM

Re: Dyno'ed the Miata
 
what kind of ignition was it stock? Did it have a big coil pack like the newer Fords, or a distributor?

txdohczc 07-02-2008 08:28 PM

Re: Dyno'ed the Miata
 
looks like a coil on wire set up to me. you can tell from the wires going to each individule coil

idiot-stick 07-02-2008 10:44 PM

Re: Dyno'ed the Miata
 

Originally Posted by spekter
what kind of ignition was it stock? Did it have a big coil pack like the newer Fords, or a distributor?

CAS, 2 coils stock

spekter 07-03-2008 04:03 AM

Re: Dyno'ed the Miata
 
Are these new coils the little Denso ones that you can find on most Jap bikes? I always thought that would be cool to do. Cheap, easy, cheap, and compact. Good call. Turbo Miata is baller as hell, by the way.

idiot-stick 07-03-2008 02:56 PM

Re: Dyno'ed the Miata
 

Originally Posted by spekter
Are these new coils the little Denso ones that you can find on most Jap bikes? I always thought that would be cool to do. Cheap, easy, cheap, and compact. Good call. Turbo Miata is baller as hell, by the way.

nah they're from a 2000+ Toyota Corolla. I wouldnt say baller as hell but thanks anyways. I probably got 7-8k in the whole car.

bigdaddyvtec 07-03-2008 03:50 PM

Re: Dyno'ed the Miata
 
That manifold looks like it has AIDS... I love it!!!

Nice #s\


:6

Tom-Guy 07-03-2008 07:13 PM

Re: Dyno'ed the Miata
 

Originally Posted by SloS13
With 15% correction to make it read like a dynojet would have which seems to be the net standard so...

The standard in irrelevancy.



Turbo Miatas are very cool, though. I will let you live.

CspecRun 07-03-2008 08:18 PM

Re: Dyno'ed the Miata
 
241hp in a Miata...that sounds like alot of fun.

mopar318 07-03-2008 08:27 PM

Re: Dyno'ed the Miata
 
Its got the torque of a 400hp honda as well. Looks like fun. O0

speedjunky01 07-04-2008 03:58 PM

Re: Dyno'ed the Miata
 

Originally Posted by mopar318
Its got the torque of a 400hp honda as well. Looks like fun. O0

what i was about to say looks like its got alot of balls even from down low, the tq looks nice and beefy.

props for a nice build man

pissnuts 07-04-2008 04:09 PM

Re: Dyno'ed the Miata
 
nice numbers ... this a a friend of a friends miata real clean car.... the video of him destroy'n the tires is nice :8
http://diyautotune.com/cars/project/...iata_turbo.htm

t_cel_t 07-06-2008 07:44 AM

Re: Dyno'ed the Miata
 
i thought correction is to correct for a non 1:1 engine rpm ratio to the tires rpm


All times are GMT -5. The time now is 03:24 PM.


© 2024 MH Sub I, LLC dba Internet Brands