dynoed the car...
i dynoed the car last weekend. the results are 209.3 whp at 6500 rpms and 185 tq at 5250. its a internally stock b18b1 with a large t3/t4 turbo. .70 trim, .63 cold, and .84 hot. car is boosting 7-8 psi on an fmu for now. have the 450's . i was wondering on your opinions if the hp is where it should be. cuz right now my goal is 250+ whp without opening the motor up. any info would be appreciated to help me reach my goal.
here's my mod list.... b18b1 msd 6a ignition box custom external coil setup nology hot wires custom ground wires ngk's iridiums no a/c or p/s custom turbo setup: tial 38 mm wastegate drag turbo manifold t3/t4 garrett/airesearch turbo .70 trim .63/.84 custom 2.5 inch downpipe w/flexpipe to a custom 2.5 inch to a twinloop exhaust tuner toyz turbo oil line kit w/ oil restrictor valve 2.5 inch custom intercooler pipes johnny race car 32 inch lenth, 8 inch hig, 2.75 thick painted flatblack on 1 side 1 gen old school hks ssqv vortech 12:1 fmu missing link hallman boost controller |
Re: dynoed the car...
ditch the FMU, run uberdata or crome and you will be there. with that you should be able to get a few more psi as well...
|
Re: dynoed the car...
i am planning to ditch the fmu but i was thinking of just tuning the 450's with the vafc2 i already have hooked up.
|
Re: dynoed the car...
You'll meet your goal if you tune it with the VAFC2. Remember to retard your timing a few degrees because the VAFC usually advances it.
|
Re: dynoed the car...
AFC isn't gonna control any timing, id ditch that too.
those 450's wont hold much before they start falling off. Get a walbro 255, tune it at like 12-14 pounds, expect 270-290ish whp if its tuned well. |
Re: dynoed the car...
you can EASILY hit 250whp with that setup with a better tune possibly...here is my bone stock b18b @ 12.48psi....57 trim .63 ar t3/t4.http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg
|
Re: dynoed the car...
I watched a guy dyno his stock integra at 11psi and he got 131whp, so bump it up.
|
Re: dynoed the car...
Originally Posted by PimpTwzt
I watched a guy dyno his stock integra at 11psi and he got 131whp, so bump it up.
|
Re: dynoed the car...
HAHAHA.
|
Re: dynoed the car...
Originally Posted by PimpTwzt
I watched a guy dyno his stock integra at 11psi and he got 131whp, so bump it up.
|
All times are GMT -5. The time now is 04:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands