HomemadeTurbo - DIY Turbo Forum
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Dyno Day Single Cam Style (https://www.homemadeturbo.com/forced-induction-7/dyno-day-single-cam-style-25199/)

FooK 08-22-2004 01:23 PM
Re:Dyno Day Single Cam Style
 
Originally Posted by trebor_nordap
where was you autometer gauge at when you where done tunning? was it 3/4 rich or half between rich and lean?
the tune came out good, if it would've came out at 12.4 a/f it would've been perfect but you're very close to that.
I dunno I havent had it hooked up for like 2 months.

Pat - I emailed torquefreaks to see if they could send me a different printout, they save all their dyno files so we'll see.

And the manifold is the GReddy manifold.

FooK 08-23-2004 08:18 PM
Re:Dyno Day Single Cam Style
 
Got my reprint done today in RPM instead.

Should be getting a new chip in the next few days too.

http://www.centerlinemotorsports.com...ages/dyno2.jpg

leed 08-25-2004 05:31 AM
Re:Dyno Day Single Cam Style
 
although i think you could've made it to 190-200hp if you went a little leaner on the fuel-closer to 13 a/f ratio
IMHO, its very unlikely that he'd pick up 20hp from a 1.0 move in A/F. Maybe 3 or 4hp up top if any.

88crxSi 08-25-2004 11:58 AM
Re:Dyno Day Single Cam Style
 
ya it's the 15g limiting air flow right? maybe an upgrade to the 18g would benefit?

either way, im not to good w/ turbo crap... graph looks good though.

FooK 08-26-2004 11:37 PM
Re:Dyno Day Single Cam Style
 
Originally Posted by crx88Si
ya it's the 15g limiting air flow right? maybe an upgrade to the 18g would benefit?

either way, im not to good w/ turbo crap... graph looks good though.
I plan on changing to a new manifold and t3 60 trim eventually. Right now I've bumped it up to 12psi and gotten some changes made in the fuel mix to put down some more to the wheels.


All times are GMT -5. The time now is 10:49 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands