Donald125

so you don`t ---- up your ecu/and, keep to injectors working correctly.
has something to do with the impendence of the injectors??

DeleriouS

does anyone have the schematic for it? or however you spell it. i will just build it. its not that hard.

DeleriouS

well see, i want to build it, because for 1 it would be cheaper...not that i care about $5, but i would like to learn. i am in electronics for school now and the only reason i took it was because i didnt know much about electronics in cars. I am not good with
1. Electronics
2. Clutches
3. Transmissions

DeleriouS

the injectors he gave me are 390cc injectors. will that be enough fuel for 10psi of boost?

Dr.Boost

Turbo size and motor would help.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

davcivic

So you have a 95 teg. I believe the 390's will work.

On the DSM injectors you will see a part number on the side of the cap. The numbers are the size of them. Like my blue tops 450's said something like b450d.

Your factory injectors have a different type of pulsation than the DSM's, that's why you need to wire the resistor to make them work correctly, then the afc or ecu reprogram will control them.

You do not need to build anything. All you need to do is put the resistors in the wire of the injector. Like cut the wire on a section anywhere and put the resistor in there to reconnect the wire. That's it.

Look at the projects in the main page, there is a 450 injector install that shows you how to do this.

God Damn that was long

Captain Bruteforce

greddy kits come wit 310s so 390s should be more than what u need