Downpipe clearence need help
This is a 2002 Hyundai accent 1.5 sohc, I dont have enough space for the downpipe, anyone kno how or what i can do to make space between the alternator and dp? need help asap
any clue on using a mini alternator like so http://www.jegs.com/cgi-bin/ncommerc...98&prmenbr=361 http://home.comcast.net/%7Echr1z/turbo/IMAG0002.JPG http://home.comcast.net/%7Echr1z/turbo/IMAG0001.JPG http://home.comcast.net/%7Echr1z/turbo/IMAG0003.JPG http://home.comcast.net/%7Echr1z/turbo/IMAG0004.JPG http://home.comcast.net/%7Echr1z/turbo/IMAG0005.JPG |
Re: Downpipe clearence need help
its pretty simple. jus dont use a huge ass looping u-bend kinda downpipe, jus make a dp that faces straight down kinda like
____________________ I ) I ) I ) I ) THIS IS WHERE IT CONNECTS TO THE TURBO... I ) i kno its not much help but a dp like this wouldn't hurt it... or u can make a I )1.5 inch dp. I ) I I I I I I I I I I |
Re: Downpipe clearence need help
brought it to menieke and the guy tried but the pipe was touching the alternator a bit
|
Re: Downpipe clearence need help
im gonna try a custom exhaust shop, meineke sucks neways
|
Re: Downpipe clearence need help
jus wrap it with heat wrap... or try to bend it a bit or smash it in a lil bit. wont hurt the flow that much. jus find exactly where its touching n smash it in a bit with a hammer... then wrap it with heat wrap a bit where it might touch.
|
Re: Downpipe clearence need help
i had a similar problem with my downpipe
my slave cylinder was in the way so u used a hammer and beat the living ---- out of it OCC style 8) |
Re: Downpipe clearence need help
alright that sounds good ill do a 1.5 straight down, smash it in, heat wrap it, then have the 1.5 welded into a 2.5, so it does look possible to put a dp without damaging the alternator
|
Re: Downpipe clearence need help
What about turning the turbo around? It looks like there might be plenty of clearance on the other side.
|
Re: Downpipe clearence need help
nah theres not enough space the clutch push rod is in the way
|
Re: Downpipe clearence need help
Originally Posted by chr1z
alright that sounds good ill do a 1.5 straight down, smash it in, heat wrap it, then have the 1.5 welded into a 2.5, so it does look possible to put a dp without damaging the alternator
Sounds like your best bet right there. I'd stay away at all possible from "smashing it in" just use smaller piping so it's still smooth flowing. If you need heat wrap my Dad got me some from work. Fire blanket is what it is really. Alot of it. I can probably send you some if you pay shipping. JP JP |
Re: Downpipe clearence need help
ahh if i read this about a minute before ordering a big roll from hamiltonmarine.com, ill try to go with the 1.5 and if it does touch the alternator ill have it banged a tiny bit and heat wrap it, also what do i use 2 hold the wrap just some regulat hose clamps?
|
Re: Downpipe clearence need help
Originally Posted by chr1z
ahh if i read this about a minute before ordering a big roll from hamiltonmarine.com, ill try to go with the 1.5 and if it does touch the alternator ill have it banged a tiny bit and heat wrap it, also what do i use 2 hold the wrap just some regulat hose clamps?
Sorry. Uhhhh....yea I guess. Wrap it tight kinda like you would for an ankle wrap. Starting and layering over it, stretching, pulling tight, wraping down on an angle a little further down on the downpipe, repeat. Hose clamps on the ends I guess. I never did it, but it sounds savvy. Good luck and post in General Disscussion when it's done with some numbers. A Hyundai.....HMT has expanded. JP |
Re: Downpipe clearence need help
well this exhaust shop out back of this dudes house was taklin about 300$ sayin that it may take along time to make somethin 2 fit thats nuts
|
Re: Downpipe clearence need help
I have an Acura Legend and dont have enough room for the dowpipe under the tranny so I am gonna just dump it out in front of the front wheel. Maybe you could do something similar.
|
Re: Downpipe clearence need help
its that i need my o2 sensors for my car to run correctly
|
Re: Downpipe clearence need help
can you make the downpipe go over top of the alternator?
|
Re: Downpipe clearence need help
no clue ill ask the muffler guy tommrowo
|
Re: Downpipe clearence need help
Is that manifold off of the scoupe turbo? I have the same engine in my winter beater na scoupe.
|
Re: Downpipe clearence need help
yea its the turbo scoupe manifold, the scoupes use the same 1.5L alpha motors, the turbo scoupe uses a t15 oil/water cooled around 115 hp at like 5 psi with oil sqirter pistons but the compression sucks .
|
All times are GMT -5. The time now is 07:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands