I had this on my car running 9 psi on my d15b2 stock block w/199k miles. well now the turbo is off and im getting ready for a new motor. I thought i would just rebuild the downpipe while its off. I saw Road Race engineering's 70 or 75 degree bend and it looks perfect. so besides that i need advise on the upper portion of the downpipe. since the ford motor was designed to point the exhuast outlet and inlet in the same direction i had to re-direct the exhaust outlet 180 deg. like so: (warning not a pretty lookin downpipe and dont laugh)


heres how it looks from the side...wow look at the restriction1 wat was i thinking!


oh yeah i have an extra exhaust housing from another turbo of the same type so i can do everything new from the start. I also saw road race's donuts is there place or a site i can get them cheaper? thanks

 

Dear god!!!!!!!! Please replace that downpipe with anything!! Use PVC if you have to, but PLEASE replace that!!!
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

lol

 

plse give me pics id love to see them especially the dp's with the exhaust housing on the left side of the turbo

 

holy ---- those are some RUGGED welds. Do those with a soldering iron lol?

 

I made a new flange for my Ford sourced T3 outa 1/2" mild. Actually made a template from plexiglass and then took it to a guy who welds stuff for me.

Then welded on a 90' mandrel bend onto that. (added o2 bungs too)
Not to hard at all, (you seem to be handy with the welder :P ) and ends up being nice and clean looking.