marc_vtec

That was the plan, i was gona laminate the mouse, frame it and put it on ebay... but i lost it

lumpenst

isnt the .42 .48 t3 too small for a b series engine?

Oscar

only if he leaves it in closed loop. I've never messed with bre, but im sure it has that option. so dont forget to enable closed loop and just drive like that.

Slo_crx1

I've never seen that option on BRE, unless you're talking about the checksum. If you can, post up or send me your Bin file and I'll take a look at it and see if anything's out of the ordinary. You do also know that only certain pr3's and pw0's can be chipped via BRE...check out the pgmfi.org forum for more info.

marc_vtec

Right....


£80 ($150 ish) frigging quid in petrol alone to get to my tuner with my car bogging all the way down there...


...get to the tuners look at the laptop and my car is reading boost whilst idling.... long story short it turned out to be a leaky pos ebay dump valve screwing my map sensor up... disconnected the t-piece to the dump valve and it worked fine, idled great and boosted!

All tuned, running 5 psi as i want it to be as safe as possible untill i get some forged bits... still loving this new found power and torque though!

Car is leaking oil at the end of the oil feed and im getting boost creep so cannot hit vtec, but that should be sorted soon...


More pics and vids to follow

A very happy
Marc

ososlohatch

good to hear its coming along

ososlohatch

also you should snap some pics of your radiator setup :P did you just get a half size and snug it up close to the motor

marc_vtec

whiterice

Nice street install. Thumbs up on the project.
The camera work and lighting are pro!
What size rims and tires you running?

ososlohatch

14's or 15's he should sell them to me those things are sickness