After my SSAC manifold crapped out, I made a log for my 14b. Since then i've had some boost creep issues, and i'll only boost up to 6.5psi(Wastegate is 8psi) I had redo some of the chargepiping, the down pipe(which I just cut shorter for the time being), and the oil drain line. I checked my piping for leaks and found a few and fixed them, it helped a tiny amount but basically the same thing. Any ideas, maybe my BOV is shot, i dunno

 

ttiwwop

damn im afraid to see what your set up looks like

 

Maybe you your wastegate is leaking by? Or the flange is warped?

 

LOL Here is my manifold

 

Flange was warped, but I had it resurface at a machine shop, and the wastegate flapper seems to be tightly shut.

 

Creep is not caused by exhaust leaks.

Port the wastegate flapper, make sure the actuator arm and/or the flapper arm aren't binding.

 

Thanks, I think the phrase im looking for is "boost lag" Sorry

 

That manifold is sick tight.

 

Thanks, just hope that it is not my problem

 

Found my problem to the boost lag, turns out one of the bolts that mounts the turbo to the manifold came out, and it was blowing through the gasket. I put the new one in, and spools up good now.