Do you think this is realistic?.
Ok, I know we all hate the old 'how much power will this make', but i'm going to ask your opinions anyway.
I'm planning on: Darton MID sleeved D16A6 Block Eagle Rods SRP 9.0 Pistons (possibly ceramic coated crowns/moly skirts) P/P A6 head (stock cam for now) Ported Intake mani Shitbird short runner manifold 14B Mitsu turbo (this may change to reach HP goal) 5" JRC intercooler 1G DSM BOV 450 cc mitsu injectors i'll be tuning with chipped PM6 and Turboedit also have Crane ignition w/boost dependent timing controller, External coil, 3bar MAP (which I'll also wire to ECU), 255 lph Hipressure Holley pump. I have a horsepower goal of 350 at the wheels. Not really sure if the 14b is going to be big enough, or the injectors for that matter. I'd really like to retain the use of pump gas (yay, 93 octane!), but again, not sure how realistic that is. What do you guys think? Flame on! Ben |
Re:Do you think this is realistic?.
you wont make ---- with that 14b its not even worth it if your motor has internal work done my friend.
|
Re:Do you think this is realistic?.
Originally Posted by mycrx
you wont make ---- with that 14b its not even worth it if your motor has internal work done my friend.
|
Re:Do you think this is realistic?.
Originally Posted by jecu
Originally Posted by mycrx
you wont make ---- with that 14b its not even worth it if your motor has internal work done my friend.
|
Re:Do you think this is realistic?.
1g dsm bov is just fine, it wont leak and if it does, crush it, youd be surprised how many big boost/big power guys run these... Yes a bigger turbo is in order but 450cc injectors are def gonna be maxed out at that power level, 550cc should handle it no prob
|
Re:Do you think this is realistic?.
thanks for the replies, you've pretty much verified my suspicions. I guess the one big thing i left out, is that i am really more concerned with short distance acceleration than i am with ultimate top end (only have 1/8 strip here). which is why i originally chose the 14b, then the build budget took a spike. i really like the idea of being able to pilfer the used DSM parts ads, so maybe a 16g and some bigger used injectors. i may just build the thing, use the 14b/450cc setup for now, let the motor break in on LOW boost, then later upgrade the turbo/injector setup to take full advantage of the bottom end.(plus, if i keep using the dsm turbos, they'll bolt up in place of the 14b)
|
Re:Do you think this is realistic?.
Realisitc.. no
2 things, 550cc injectors and a bigger Turbo, my suggestion would be a SC34 or SC50. |
Re:Do you think this is realistic?.
14b would work.... if you had two of them
|
Re:Do you think this is realistic?.
10000000hp. build it and take pics, that seems like a good set up.
|
All times are GMT -5. The time now is 08:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands