Re: Digi-Key 2.5 bar map sensor
 

Why does eveyone take things so seriously?

Re: Digi-Key 2.5 bar map sensor
 

Umm...yeah ::)

Re: Digi-Key 2.5 bar map sensor
 

Heh, it shows. ::)

Re: Digi-Key 2.5 bar map sensor
 

theres's only three cool people in this thread, and they're the last three that posted :D

Re: Digi-Key 2.5 bar map sensor
 

Thanks O0

Re: Digi-Key 2.5 bar map sensor
 

Thanks O0

I have a tip before posting a request for help on ANY forum. ALLWAYS hit these two sites first.

www.google.com
www.yahoo.com

Re: Digi-Key 2.5 bar map sensor
 

To add some more usefull information here....

I used turboedit ng55 and currently ng60 for 2.5bar maps. I used Xenocrons basemapper with a .75 tipin adjust thingy. Ive got it mounted in the engine bay, has survived rain driving and 90+ weather so far... i e-taped the crap outta it. Its working perfectly like oem... ive run 8 - 10 - 13psi on it so far without issue.

As far as installation... i went to radioshack and got some parts for serial cables, little wire terminal ends that go into a serial plug... then soldered 6inches of wire to 3 of them. Then pushed one over its terminal on the sensor... and taped it. Repeat 3x... then taped the crap outta the sensor. Then on the other end of the wires i put a 4 wire trailer hitch plug ... the other side of that plug i spliced into the stock map harness wires... this way i can go back to stock whenever i need/want to. Boom... works.

Re: Digi-Key 2.5 bar map sensor
 

Do any of you have a collection of circuits for this map sensor.

Had found this really cool circuit where the guy had hooked up a Digital Boost gauge using just 3 components. A really trick circuit. But now I cant seem to find it.

If you guys have some links to DIY circuits with this map sensor pls post up.