HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Did i hook it up rite (https://www.homemadeturbo.com/forced-induction-7/did-i-hook-up-rite-84456/)

lilpooh21186 09-30-2007 06:03 PM

Did i hook it up rite
 
1 Attachment(s)
Attachment 23745 SO today after making some VId of my freinds and i i noticed my car had been leaking small amout of OIL So i check it and it seems that the Black box that the pcv goes to has oil on the top of it + now after being boosted for a month there hasnt been 1 drop of oil in my catch can so im not sure if i hooked it up correctly so heres what i did.

1. Remove pcv valve plugged the intake vacume sorce.
2. Routed the hose from the black box to the catch can via coolent hoze.
3. The hoze that connects from the block to the box was left intact since there is only 1 nipple on my catch can i didnt route in a vacume sorce.

imburne 09-30-2007 06:12 PM

Re: Did i hook it up rite
 
I dont think so man. Its pretty simple. The part where you put the filter on the turbo... Put a fitting somewhere there. Run a line from that to your catch can and the other port on the catch can to your pcv

lilpooh21186 09-30-2007 06:26 PM

Re: Did i hook it up rite
 
i Thought the oil vapor going into the intake would prevoke detonation

TorganFM 09-30-2007 07:37 PM

Re: Did i hook it up rite
 
It does. Just run the breather and the charcoal box to catch cans with no vacuum source. This is good enough usually. Fancy PCV setups just lower the effective octane of fuel and gunk up the turbo.

RobertPadron 09-30-2007 09:46 PM

Re: Did i hook it up rite
 
That's one sexy lookink manifold. What kind is it?

lilpooh21186 09-30-2007 11:47 PM

Re: Did i hook it up rite
 
ssautcrome ramhorn payed 255 for it but in my opinion its better off buying a reliable one ive welded it 2 times already

E-b0la 10-01-2007 02:40 AM

Re: Did i hook it up rite
 
Move the oil line so it's not resting on the manifold.

BLAAST 10-01-2007 08:40 AM

Re: Did i hook it up rite
 
I have seen setups where the valve cover vapors where recirculated to the catalytic converter. Some jobber cats even feature a straw expecially to do this. I was kind of worried it would not venturi enough and maybe blow exhaust gases into the valve cover but apprently not....
I never did it but I guess it's a good way to burn this vapor and smell without gunking up the turbo and IC piping or causing deto.

crx2211 10-01-2007 10:31 AM

Re: Did i hook it up rite
 
ROFL at all your speeling mistakes. ;D

Good thing this is a car forum full of drunk and high misfits instead of one of those shitty sites that requires threads to have correct grammer and all that nonesense. I hope you get your car situation "rite" this time and don't hook up the "vacume" "hoze" wrong ahaha. ;)
Keep up the good work!

lilpooh21186 10-01-2007 10:21 PM

Re: Did i hook it up rite
 
hey #1 typing on a laptop is hard #2 i was high out my mind so its 2 times harder


All times are GMT -5. The time now is 03:56 AM.


© 2024 MH Sub I, LLC dba Internet Brands