DARYL's D16Z6 Build
#33
Re: DARYL's D16Z6 Build
How much for the narrow band O2 sensor to get the ECU working properly?
He also needs another crank key I believe that makes 2 he has lost now.
Dizzy bolts
And a cheap bottle of the cheapest west coast whiskey that they make "un opened please"
And Daryl the car got pushed outside and we are supposed to get freezing ------- rain tonight. Need to get everything welded up first before we proceed to go any further with it.
Also does anyone know where the rear coolant vent is to bleed out the air in the block, I can only find the one on coolant inlet housing to the block. My H has it at the thermostat. WEIRD to me
And the whole picture thing, pictures were deleted off my S/D card and also were deleted off my photobucket account. He has some still I HOPE to send to my phone and I can forward to my email and put up on photobucket. Just WAITING on him
He also needs another crank key I believe that makes 2 he has lost now.
Dizzy bolts
And a cheap bottle of the cheapest west coast whiskey that they make "un opened please"
And Daryl the car got pushed outside and we are supposed to get freezing ------- rain tonight. Need to get everything welded up first before we proceed to go any further with it.
Also does anyone know where the rear coolant vent is to bleed out the air in the block, I can only find the one on coolant inlet housing to the block. My H has it at the thermostat. WEIRD to me
And the whole picture thing, pictures were deleted off my S/D card and also were deleted off my photobucket account. He has some still I HOPE to send to my phone and I can forward to my email and put up on photobucket. Just WAITING on him
#34
Re: DARYL's D16Z6 Build
No D's I know of one bleeder. But bleed some are out I keep the thermostate housing loosen up until water rush out then tighten the housing up. Then continue filling the cooling system bleed the air out the upper rad. hose bleeder. Keep adding until the radiator is completely full. Place cap on fill the res. to the cold max. mark. Run the engine untill the cooling fan kicks a couple times. Let the engine cool top off the rad. or res. that should be it.
#36
Re: DARYL's D16Z6 Build
NEW UPDATE WITH OLD AND TO CURRENT PICTURES FOR YOU NUKKA's
The wife that takes the mans money
The kid that helps the wife take his money"DAD AND SON"
BEARING AND RODS
PISTONS
TRANS ---- FO SHO
OBX LSD
CLUTCH DISC LSD MOTORSPORTS THANKS ALOT YOUR THE GREATEST "caps for a reason"
widebody93 "aka" heyseemoreh22" holding the LSD
Widebody93 installed the OBX LSD with Bones advise
MOTOR ASSEMBLY
Motor back at widebody's garage
Ferrrea 6000 valves and Skunk2 springs and retainers
Getting ready for Endyne Block posting
The Aluminum Block posts with Loctite Aluminun weld
YOU KNOW WHOS SHOP THIS BEE
Head gasket copper sprayed on both sides waiting HEAD
Head on
Almost ready to rock
Engine Install
Widebody guiding it in like he did on Spikers mom he he he he It's all good
"reminder to Brians crazy night in 2 coughs"
760cc's of pure "not yet used POWER"
AND WAITING ON DARLY TO COME HOME
The wife that takes the mans money
The kid that helps the wife take his money"DAD AND SON"
BEARING AND RODS
PISTONS
TRANS ---- FO SHO
OBX LSD
CLUTCH DISC LSD MOTORSPORTS THANKS ALOT YOUR THE GREATEST "caps for a reason"
widebody93 "aka" heyseemoreh22" holding the LSD
Widebody93 installed the OBX LSD with Bones advise
MOTOR ASSEMBLY
Motor back at widebody's garage
Ferrrea 6000 valves and Skunk2 springs and retainers
Getting ready for Endyne Block posting
The Aluminum Block posts with Loctite Aluminun weld
YOU KNOW WHOS SHOP THIS BEE
Head gasket copper sprayed on both sides waiting HEAD
Head on
Almost ready to rock
Engine Install
Widebody guiding it in like he did on Spikers mom he he he he It's all good
"reminder to Brians crazy night in 2 coughs"
760cc's of pure "not yet used POWER"
AND WAITING ON DARLY TO COME HOME
#38
Re: DARYL's D16Z6 Build
And I took his nukka butt home and came home to a wife"mine" passed out from GREY GOOSE bottle sittin in front of here yet I'm not allowed Hard liquor.
WAIT that bottle is dry
DARLY you plant that?
---- IT I'm out
WAIT that bottle is dry
DARLY you plant that?
---- IT I'm out