damn, cant get the turbo mounted..wastegate is getting in the way!!!!!
03-27-2003, 05:51 AM
#11
!! UNCONFIRMED EMAIL !!
Join Date: Dec 2002
Posts: 6,656
Re:damn, cant get the turbo mounted..wastegate is getting in the way!!!!!
if you start grinding and green stuff or oilly ---- comes out of the spot your grinding it was important and you shouldnt have been grinding there 
but seriously, can you take a pic of the spot that is in question?
but seriously, can you take a pic of the spot that is in question?
03-27-2003, 08:46 AM
#12
Guest
Posts: n/a
Re:damn, cant get the turbo mounted..wastegate is getting in the way!!!!!
you can grind about anywhere on the front of the block about 2 mm however if youve never done it i wouldn't tell you to do it.
as they said try and post some pics and a detailed pic of where its hitting and rubbing at.
u "might"be able to actually grind the wastegate head down.
as they said try and post some pics and a detailed pic of where its hitting and rubbing at.
u "might"be able to actually grind the wastegate head down.
03-27-2003, 11:05 AM
#13
3.0 BAR
Join Date: Jan 2003
Posts: 4,401
Re:damn, cant get the turbo mounted..wastegate is getting in the way!!!!!
dam that sucks i had the same stupid problems with my t3. i grinded a bit of the block and rotated the inlet housing on the turbo. and for the wastgate i actually bent the plate that attaches to the housing. so instead of the wasgate sitting perpendicular to the block it sits at an angle.the angle in the pic is more than what i actually did but you get the point. i made a pic on paint but i cant host it anywhere. ill email it to you.
anybody want to host my funny looking pic?
anybody want to host my funny looking pic?
03-27-2003, 12:21 PM
#14
3.0 BAR
Join Date: Dec 2002
Posts: 3,396
Re:damn, cant get the turbo mounted..wastegate is getting in the way!!!!!
renr send it to me email. shortyz@teamsynthetik.com
also u can grind out all the webbing, but i dont see why u cant rotate both , or then is the outlet in the wrong spot?
also u can grind out all the webbing, but i dont see why u cant rotate both , or then is the outlet in the wrong spot?
03-27-2003, 04:32 PM
#16
!! UNCONFIRMED EMAIL !!
Join Date: Dec 2002
Posts: 6,656
Re:damn, cant get the turbo mounted..wastegate is getting in the way!!!!!
i know what he is talking about, there is a threaded hole/mountain on the front of the block fo extra support of the stock exhaust manifold or something. just grind that ****** off...
on the front of the block fo extra support of the stock exhaust manifold or something. just grind that ****** off...
03-29-2003, 03:00 PM
#19
0.5 BAR
Join Date: Mar 2003
Posts: 80
Re:damn, cant get the turbo mounted..wastegate is getting in the way!!!!!
LOL, don't grind on your blocks. All you have to do is cut and bolt the actuator a small piece of angle iron( I used a small piece of angle aluminum) then bolted the bracket and actuator to the ac bracket. You will have to weld an extension to the actuator rod.
I can email you a pic if you want.
I can email you a pic if you want.
