HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   d16z6 with ihi good set up for top end (https://www.homemadeturbo.com/forced-induction-7/d16z6-ihi-good-set-up-top-end-11474/)

tuning art 11-03-2003 09:20 PM

d16z6 with ihi good set up for top end
 
I wanna turbo my d16z6 with an IHIrhb5 and i wounder if the SOHC good with turbo to run top end , because i like to highway racing alots right now my top end is so shitty !!! thank i heard it don't push hard when it got up to 7000 rpm ruinng about 9 psi max with afc

turboboy 11-03-2003 09:24 PM

Re:d16z6 with ihi good set up for top end
 
id get something bigger

nonvtec 11-03-2003 09:42 PM

Re:d16z6 with ihi good set up for top end
 
Z6's lose power after 7 G's anyway, so if the turbo drops off after that too, it won't really matter.

Reddy 11-03-2003 11:26 PM

Re:d16z6 with ihi good set up for top end
 
My Z6 pulled hard all the way up to 8k. But yeah if you want highway power you'll want a bigger turbo.

greddycrx 11-04-2003 12:27 PM

Re:d16z6 with ihi good set up for top end
 
ihi turbos are small as ---- and i would never use one in my opinion!!! the smallest i would go on any d-series would be the t25 from the 2nd gen eclipse. that one should be ok to pull you to redline. actually, i lied, just ------- get a 1st gen eclipse turbo, tdo5-14b. those are bigger and would be perfect for your motor!! either that one or the t3 42/48 which i have and is great!!!! pulls hard all the way up

tuning art 11-04-2003 07:58 PM

Re:d16z6 with ihi good set up for top end
 
yeah i was woundering about that too but damn my IhI is so clean lolz hmm i also got the TE04H but i can see oil and ---- on it so i guess it leaking oil or something so i didn't want to use it . what is the stock honda civic speed limted 130 mph ? that all i got up to >:(

oldschoolteg 11-04-2003 08:03 PM

Re:d16z6 with ihi good set up for top end
 
Make sure you have a free flowing exhaust and you should have topend.

hotrex 11-05-2003 01:30 PM

Re:d16z6 with ihi good set up for top end
 
ihi cut out on my car by about 5700 rpms. damn thing is too small and flows dog ---- for cfms. i run a t3 48./60 now and that my friend is some top end

bambooseven 11-05-2003 02:14 PM

Re:d16z6 with ihi good set up for top end
 
I'm going with a 2nd Gen DSM T25 on my Y8, mainly for canyon racing, i'm not sure i'll have as much on the top end as i'd like to, but i'll sacrifice for a bit quicker spool and a decently efecient upper range

turbodelsol 11-05-2003 03:06 PM

Re:d16z6 with ihi good set up for top end
 
From what I understand, the IHI turbo's effective range is @ 2200- 5500 rpm (just look at the engine range of the car it comes in and the redline -- stock ford stuff). I personally run a .42/.48 T3 and I hit full boost at @ 3600 rpm and pulls until rev limiter kicks in....12-13psi easily gives you highway top end IMHO!!! Now I digress, as most people now know that the IHI is a good street car turbo, and the T3 and bigger for drag and highway racing.....


All times are GMT -5. The time now is 01:21 PM.


© 2024 MH Sub I, LLC dba Internet Brands