HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   d16y8 boost questions (https://www.homemadeturbo.com/forced-induction-7/d16y8-boost-questions-56008/)

sloganish 02-15-2006 09:26 PM

d16y8 boost questions
 
My 98 hatch has around 128k on the engine, in cold start up i hear valve knock, otherwise it runs pretty strong, would i be safe boosting 6.5psi untuned on a completley stock engine? ive researched it and its sort of a toss up but i was wondering if anyone could give me some advice here, its my first turbo project, the turbo is a dsm spec, manifold is d series, everything else is plug and play.

SpankedYA! 02-15-2006 09:27 PM

Re: d16y8 boost questions
 
Its not safe to boost anything "untuned"

sloganish 02-15-2006 09:35 PM

Re: d16y8 boost questions
 
i guess i should have seen that response coming, it was an ignorant stament that i made and i apoligize, but what would you suggest i do?

JDMFantasy2K 02-15-2006 09:58 PM

Re: d16y8 boost questions
 
Sounds like you could use a good tune up first. Definately do a valve lash adjustment, seafoam it, get colder plugs, new wires, make sure the cap and rotor is good, and if you aren't 100% sure that your clutch still has life, then do that too. But if you're only going to do 6.5 psi, then you should be safe with the clutch, considering it's not too badly beat. Otherwise get and ECU and do it right, and read.

sloganish 02-15-2006 10:47 PM

Re: d16y8 boost questions
 
i replaced the clutch it has around 25k on it, the distributor cap, plugs and wiores have around 15k on them, and it had a tune up when i got it, religious oil changes

sloganish 02-15-2006 10:51 PM

Re: d16y8 boost questions
 
i dont even know why i posted it as a d16y8, its the stock y7


All times are GMT -5. The time now is 04:38 PM.


© 2024 MH Sub I, LLC dba Internet Brands