D16y7 setup suggestions
welll i was looking at going turbo so far this what i can get
hf manifold mitsubishi turbo adapter (you can bolt any other mitsubishi turbo t25,14b,16g) turbo off a (lebaron) spools @ 2500rpm denso bov off a mazda some intercooler piping dsm fuel pump (good for 250hp) mazda intercooler or dsm intercooler and piping exhaust adaptor made to start a down-pipe dsm 450 injectors now as for fuel management i think ill convert obd2a to obd1 and run uberdata on a p06 or something...if not ill run an afc hack this will be going on 1997 civic coupe with d16y7....the plan is to make a dialy driver nothing serious....just some more umph ill need chargepipes....now i was wondering can CAI piping that i have already have be used as chargepipes? any other suggesion would be greatly appreciated thank you |
Re: D16y7 setup suggestions
for the charge piping, you can use your cai pie, you'll probably need a ubend to get it to the outlet of the intercooler, for the piping from turbo to intercooler inlet you coulld do it with 2 u bends. jcwhitney.com i think. if you got a bypass valve on the cai pipe you might wanna remove that.
|
Re: D16y7 setup suggestions
Originally Posted by vietnameeh
welll i was looking at going turbo so far this what i can get
hf manifold- junk use your stock dx mani and cut the cat off and get a t-25 flange welded onto it. ti flows better and dosent look ghetto mitsubishi turbo adapter (you can bolt any other mitsubishi turbo t25,14b,16g) turbo off a (lebaron) spools @ 2500rpm denso bov off a mazda - get a GReddy knock off form ebay there 65.00 and sound good some intercooler piping dsm fuel pump (good for 250hp) mazda intercooler or dsm intercooler and piping : get a dsm side mount it fits behind the bumper on the passenger side exhaust adaptor made to start a down-pipe - use the dsm o2 dumpo and get a 2 1/2 2 bolt flange and have a exhaust shop make u a down pipe or get some mandreal bends and weld it yourself dsm 450 injectors - get a honda risestor box and wire it in below the manifold cut the inner rails of the injectors where the clip goes on wiht a razor blade and u can use stock honda clips speaking of manifold get a d16y8 form eb ay for 50.00 it flows so much better than the dx toilet bowl style. now as for fuel management i think ill convert obd2a to obd1 and run uberdata on a p06 or something...if not ill run an afc hack get a afc thats it this will be going on 1997 civic coupe with d16y7....the plan is to make a dialy driver nothing serious....just some more umph ill need chargepipes....now i was wondering can CAI piping that i have already have be used as chargepipes? any other suggesion would be greatly appreciated thank you im running a y7 /z6 vtec wiht a t-25 setup nice and clean + its a sleeper. |
Re: D16y7 setup suggestions
my d16z6 head will be for sale here in a week or 2
it has 80 k on it and vtec engauges great the dizzy is included it has y7 guts installed for a plug and play application 150.00 + shippin e-mail me for detials jdm97ek4@hotmail.com |
Re: D16y7 setup suggestions
the mitsu turbos from the lebaron have the chrysler bolt pattern and will not work with the normal mitsubishi flange.
|
Re: D16y7 setup suggestions
here's a link to a very similar setup that I built. https://www.homemadeturbo.com/forum/...?topic=42345.0 the chrystler te04h has a different flange like stated above.
|
Re: D16y7 setup suggestions
meh, i say leave the y7 head on it. get yourself a saab t3 .42/.48 50 trim from a saab900. However I hear wastegate placement is a bitch with anything bigger than a 14b, I say spend the $100 on a LSDMotorsports.com log manifold kit and make yourself a log mani.
|
Re: D16y7 setup suggestions
sweet. another 15yo kid on here who posts up a dream and wants everyone to tell him what they think. he posted then he will come back about a week later and see what people said.
I think if you looked around on the site, you would see that alot of people have already done this exact same build. its pretty simple. they all use the same components in one way or another if you look and analize. |
Re: D16y7 setup suggestions
ummmm im not 15.....i think that was uncalled for...you coulda put it in a niceer way....i was just askign ive been reading alot and just wanted some suggestions whether i can use better parts or what not...sorry im not all that knowledgable
|
All times are GMT -5. The time now is 01:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands