d16a9
 

Hello, them comment that I have Civic a Si92 with a d16a9 engine, I want to put to him turbo, my idea is a garret t-25, injectors of 450cc, intercooler and a Apex, whereupon pressure advises me to walk calm. Excuse that my English is very bad

Re:d16a9
 

what ??? ?????

Re:d16a9
 

he is saying. He wants to turbo his d16a9 with a t25. And Use 450cc injectors with a APEX controller. I also believe he is asking what psi would be good on a d16a9



Comments:
Personally I would not go higher than 5.5 BUT alot of people here go alot higher.
450cc's DSM injectors are a decent way to go with a APEX although it seems you are forgetting your timing. You also need a MSD BTM or similar. with the intercooler you could go with a little more psi. Since the air charge should be a bit colder.

Re:d16a9
 

Hahahahha Damnnn sounds like a german trying to speak english hahahaha.
Sorry for that..to funny to ignore.
Apex controler?? hmmm don't know about that but A T-25 is alright I would boost the ---- out of it hahaha

Re:d16a9
 

around 6psi should be safe i have a t25 for sale and some 450's in a week

Re:d16a9
 

spoon, dont worry about your english. you speak it better than most of the rednecks

Re:d16a9
 

wha cha'll talcing bouht... why you yalla bellie!

Re:d16a9
 

....

Re:d16a9
 

A t-25 is a good turbo for a D series engine. Personally I would go 6-8 psi with retarded timing, and since you live over seas maybe you have a higher octane that we crave for. Just tune the engine, but dont over do it, those D series rods are very weak ;)

Re:d16a9
 

*BANG!!!* you have been shot. go re-learn english.;)