d16a9
#1
d16a9
Hello, them comment that I have Civic a Si92 with a d16a9 engine, I want to put to him turbo, my idea is a garret t-25, injectors of 450cc, intercooler and a Apex, whereupon pressure advises me to walk calm. Excuse that my English is very bad
#3
Re:d16a9
he is saying. He wants to turbo his d16a9 with a t25. And Use 450cc injectors with a APEX controller. I also believe he is asking what psi would be good on a d16a9
Comments:
Personally I would not go higher than 5.5 BUT alot of people here go alot higher.
450cc's DSM injectors are a decent way to go with a APEX although it seems you are forgetting your timing. You also need a MSD BTM or similar. with the intercooler you could go with a little more psi. Since the air charge should be a bit colder.
Comments:
Personally I would not go higher than 5.5 BUT alot of people here go alot higher.
450cc's DSM injectors are a decent way to go with a APEX although it seems you are forgetting your timing. You also need a MSD BTM or similar. with the intercooler you could go with a little more psi. Since the air charge should be a bit colder.
#9
Re:d16a9
A t-25 is a good turbo for a D series engine. Personally I would go 6-8 psi with retarded timing, and since you live over seas maybe you have a higher octane that we crave for. Just tune the engine, but dont over do it, those D series rods are very weak
Thread
Thread Starter
Forum
Replies
Last Post
djnikko
Turbo Parts For Sale
0
12-18-2002 07:48 PM