d15b7 turbo horsepower?
 

What kind of horsepower and torque are you guys laying down with a turbo d15b7 (head and block) & at what psi. What kind of times are you running at what psi and all? Best kills? I just wanna know what i can look forward to-

Re: d15b7 turbo horsepower?
 

you can look forward to a car that will still not be remotely fast turbo... congrats.

Re: d15b7 turbo horsepower?
 

yeah, 200 hp FWD in a light car running 13's is slow.

wish I was that fast..............

Wait, I was for less money.

Re: d15b7 turbo horsepower?
 

mine just dynoed today and will be posting the dyno sheet this afternoon made 192.3 horsepower on a stock bottom d15b7 7psi,with a d16at si cam...not run at the track yet but we will see...compression checked out accross the board been boosted almost 3000 miles.

Re: d15b7 turbo horsepower?
 

bennyhon, dude wats your setup for 192.3 hp? I'm also going to turbo my b7, in the far future...

Re: d15b7 turbo horsepower?
 

900hp stock block.

Re: d15b7 turbo horsepower?
 

Knock knock.

Who's there?

The rods in my b7 after boosting 8 psi on a .48/.60

Re: d15b7 turbo horsepower?
 

setup:
b7 bottomend
b7 head
si cam
14b turbo
3 inch downpipe
3 inch charge pipes
uberdata
dsm 450's
wideband tuned
si tranny
looped dump
front mount intercooler
8psi thats as much as i would put on the motor...no more my bin file is available if anyone would likeit.

Re: d15b7 turbo horsepower?
 

3" dp and charge piping is overkill for that setup.

I used 2.5" for both and it works great.

Re: d15b7 turbo horsepower?
 

yeah its overkill but i got it off my my friends gsr turbo setup..for 40bux...piping...so i took it and ran. >:D i want to run like you the 2.5 cause the air will have a lil more velocity to it...rather than lower velocity bigger volume.