d15b7 turbo horsepower?
 

What kind of horsepower and torque are you guys laying down with a turbo d15b7 (head and block) & at what psi. What kind of times are you running at what psi and all? Best kills? I just wanna know what i can look forward to-

Re: d15b7 turbo horsepower?
 

you can look forward to a car that will still not be remotely fast turbo... congrats.

Re: d15b7 turbo horsepower?
 

yeah, 200 hp FWD in a light car running 13's is slow.

wish I was that fast..............

Wait, I was for less money.

Re: d15b7 turbo horsepower?
 

mine just dynoed today and will be posting the dyno sheet this afternoon made 192.3 horsepower on a stock bottom d15b7 7psi,with a d16at si cam...not run at the track yet but we will see...compression checked out accross the board been boosted almost 3000 miles.

Re: d15b7 turbo horsepower?
 

bennyhon, dude wats your setup for 192.3 hp? I'm also going to turbo my b7, in the far future...

Re: d15b7 turbo horsepower?
 

900hp stock block.

Re: d15b7 turbo horsepower?
 

Knock knock.

Who's there?

The rods in my b7 after boosting 8 psi on a .48/.60

Re: d15b7 turbo horsepower?
 

setup:
b7 bottomend
b7 head
si cam
14b turbo
3 inch downpipe
3 inch charge pipes
uberdata
dsm 450's
wideband tuned
si tranny
looped dump
front mount intercooler
8psi thats as much as i would put on the motor...no more my bin file is available if anyone would likeit.

Re: d15b7 turbo horsepower?
 

3" dp and charge piping is overkill for that setup.

I used 2.5" for both and it works great.

Re: d15b7 turbo horsepower?
 

yeah its overkill but i got it off my my friends gsr turbo setup..for 40bux...piping...so i took it and ran. >:D i want to run like you the 2.5 cause the air will have a lil more velocity to it...rather than lower velocity bigger volume.

Re: d15b7 turbo horsepower?
 

hey jago, if you wanted to push between 10 and 12 psi on a d series, what size piping would be adaquate enough?

Re: d15b7 turbo horsepower?
 

I just pulled the head on my friends D15B7 last night, after work I threw a new HG on and I need to head over there right now to finish things up.

With 450cc's, chrome eprom, 14b @ 12psi, ect... I am expecting it to be somewhere right about 200whp.

Re: d15b7 turbo horsepower?
 

On what turbo? 2.25" might be enough, but going 2.5" couldn't hurt ;)

Re: d15b7 turbo horsepower?
 

koby, at 200 hp, aren't u worried about breakin something, like a rod? :(

Re: d15b7 turbo horsepower?
 

I would say 200 hp is right around the max the little b7 rods can handle. Any more than that and you are surely gonna pop.

Re: d15b7 turbo horsepower?
 

it is getting towards the limits. they are little pencil dick rods, but 200whp/12psi should be alright. We've got good tuning, and lots of fresh parts. I'm not worried about it.

Re: d15b7 turbo horsepower?
 

good luck.

Re: d15b7 turbo horsepower?
 

good luck my other b7 popped at 10 psi...and im making almost 200 on 8psi

Re: d15b7 turbo horsepower?
 

t3 48/60 8 psi ull be fine

Re: d15b7 turbo horsepower?
 

Exactly the setup that fux0red my motor :D

Re: d15b7 turbo horsepower?
 

been running it for a while
you dont wanna know the miles on my motor before the turbo

Re: d15b7 turbo horsepower?
 

i'd like to se that dyno sheet

sounds pretty high


you must have went to the same dyno as that kid that claimed 255hp on 10psi on a z6