D15 block STOCK!!! How much boost?
 

1. How much boost can my stock D block handle without any block guards???

2. Can any one elaborate bolts that are used to guard the block on high boost levels?

Re: D15 block STOCK!!! How much boost?
 

It depends on the ----------ing turbo, ----------er

Re: D15 block STOCK!!! How much boost?
 

20psi :8

Re: D15 block STOCK!!! How much boost?
 

yep, you can run 20psi all day long :6 :y

Re: D15 block STOCK!!! How much boost?
 

So why do you need the block guard for? Only for crazy boost over 20psi?


Jagojon3: I hawe a word for you to learn. POPUSI MI KURAC. Eng. translation for suck my d...
Now you can be smart saturday night when you go out to meet girls. You can say to them it means does she like vanila icecream :y :y :y

Re: D15 block STOCK!!! How much boost?
 

The turbo is from Audi 1.8T 180hp. I is not big and i do not know the A/R if that is what you mean.

Re: D15 block STOCK!!! How much boost?
 

I think it's a general rule of thumb with most hondas not to go past 8-10 psi if you want it to be a reliable daily driver...unless you are a good tuner with decent tools.

Honda piston rings just aren't great. D15 rods are like pencils too. I'd say shoot for like 160-170 whp and be content. You might be able to reach 200 whp with 8 psi and a mini-me swap. who knows.

Those audi turbos are tiny as ---- though...prolly good for a d15

Re: D15 block STOCK!!! How much boost?
 

Thanks.
What do you think about block guard bolts. The one that bolt in the block?
Do I hawe to do that? I am not planong to go over 10psi.

Re: D15 block STOCK!!! How much boost?
 

BOlt into the block?

Post a link?

And DO SOME RESEARCH!!!!!!

Re: D15 block STOCK!!! How much boost?
 

You don't need a block guard.

Re: D15 block STOCK!!! How much boost?
 

i think he means the studs that arp makes...instead of a bolt ita threaded on both sides and u use a nut and washer to fasten it down..

Re: D15 block STOCK!!! How much boost?
 

I believe he's talking about posting. And personally I wouldn't bother posting a D15 but that's just me.

Re: D15 block STOCK!!! How much boost?
 

i'm doing 10psi right now on a stock d15b7. fill the block if you want to or block post it. block guards aren't bad. my ls has an ac block guard in it

Re: D15 block STOCK!!! How much boost?
 

i hawe a problem with some tehnical words so I try the best I can to translate.
OK: So I car run 10psi on a stock block without any reinforcemet to the botom end?
ALSO IMPORTANT. My car is a 96 Civic EK3 and the engine is D15Z6 114hp Vtec-E
it is similar to the USA d16Z6 or Y8.
Honda made this engine only for Euro market so there is no tuning parts for this engine.
That in mind I managed to find y8 head and planing to get Crower cam in it and put that head on my D15 block.
Afteh trat I will resize the TB to 60mm and do some work on the intake maifold.
For a fuel management on my turbo setup I will use DASTEK unichip.
What is the uper limit for the stock injectors and fuel pump?

Re: D15 block STOCK!!! How much boost?
 

Stock injectors are exactly what they say they are. STOCK! Got to get some bigger ones to be on the safe side. ESPECIALLY around 10psi. Even though your in the Euro Market, you should still be able to Convert to OBD1 and run Chrome or Uberdata, or simple use an AFC Hack.

Re: D15 block STOCK!!! How much boost?
 

i have a jdm d15b btec. yep btec i plan on getting tuned to around 14psi on my 15g greddy turbo. right now its at 10 psi and it hauls ass. btec mad power.

Re: D15 block STOCK!!! How much boost?
 

What parts will you change on the engine? Block reinforcement, fuel pump ....?

Re: D15 block STOCK!!! How much boost?
 

---- a btec

Re: D15 block STOCK!!! How much boost?
 

dude i ran 18 psi on my d sries for 15k miles

Re: D15 block STOCK!!! How much boost?
 

haha :8

Re: D15 block STOCK!!! How much boost?
 

What hapend after 15k miles?

Re: D15 block STOCK!!! How much boost?
 

;Dim guessin after 15k miles he hit MaD tyte BTEC yo!! :y