HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   d series oil pan (https://www.homemadeturbo.com/forced-induction-7/d-series-oil-pan-16551/)

djfob 02-27-2004 01:01 PM

d series oil pan
 
I'm looking for a spare oil pan for my d16z6. Are all d series oil pans interchangable? Did a search and nothing came up. Thanks in advance.

greddycrx 02-27-2004 01:43 PM

Re:d series oil pan
 
i dont think all d-series are interchangable but for the most part some do switch out. i would guess that all 88-91 pans are the same and almost all 92+ are the same but i wouldnt go based off what i said. i have a crx and have never had any other civic to work on....

Semnos 02-27-2004 04:35 PM

Re:d series oil pan
 
I used a old ZC browntop from my '87 CRX oil pan on my 92 EG hatch with a D15B2 engine...it fit like a charm...a bit different from the inside, but the same on the outside

d16tuner 02-27-2004 06:51 PM

Re:d series oil pan
 
If you can't get a solid reply here. try a search at http://turbod16.no-ip.com/

Those guys know pretty much everything about what will fit where on a D16

89dxhunchback 02-27-2004 07:12 PM

Re:d series oil pan
 
The 96+ oil pans are totally different, they won't even bolt up to the older 88-95 blocks.

The 92-95 Z6 oil pick-up tube goes down further than the 88-91 A6/B2 pick-ups, so you can't bolt a 88-91 pan to a Z6 engine unless you also swap out the oil pick-up tubes.

The Z6 oil pan will fit on the A6/B2, but the oil straner will be a little higher than its designed to. Is that a really bad thing ?? I'd of said yes about 8 months ago, but my friends running a Z6 pan on his A6, and its fine..

djfob 02-27-2004 07:48 PM

Re:d series oil pan
 
hmm so to be safe I should find another z6 pan then. Don't wanna weld on my return fitting to the pan then it not bolting up to engine.

d16forlife 02-27-2004 08:24 PM

Re:d series oil pan
 

Originally Posted by d16tuner
If you can't get a solid reply here. try a search at http://turbod16.no-ip.com/

Those guys know pretty much everything about what will fit where on a D16

WTF?Those guys are dipshits!!All they know is about
pre-fabed turbo kits.Please dont give false information >:(

Tad 02-27-2004 09:10 PM

Re:d series oil pan
 
what about similar year pans?
like 92-95?

wil a z6 pan fit on a b7 block?
what about other eg pans?

thanx

Dr.Boost 02-27-2004 09:33 PM

Re:d series oil pan
 

Originally Posted by d16tuner
If you can't get a solid reply here. try a search at http://turbod16.no-ip.com/

Those guys know pretty much everything about what will fit where on a D16

Doesn't look like they want to help. :-\
http://www.turbod16.com/viewtopic.php?t=5943
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

djfob 02-28-2004 03:13 AM

Re:d series oil pan
 

Doesn't look like they want to help. :-\
http://www.turbod16.com/viewtopic.php?t=5943
Nope they were no help at all. Not even a single reply or even a edumacated guess. :P


All times are GMT -5. The time now is 05:13 PM.


© 2024 MH Sub I, LLC dba Internet Brands