d-series motor output?
03-03-2003, 07:13 PM
#1
0.5 BAR
Thread Starter
Join Date: Feb 2003
Posts: 71
d-series motor output?
ok i'm planning to turbo my d-series motor, i believe it is the d15 motor, im going to t25 turbo it, with apexi afc, rx-7 second gen intercooler. later along the lines get 450cc injectors from dsm, how much boost can i handle and how much hp would i gain? i'll build it a little later on just for kicks and i want about 140 to the wheels. i want to hit just good ole 14.5 secs in the 1320s. i have a gen5 cx. prolly upgrade cams or someshit.
-brian
-brian
03-03-2003, 08:09 PM
#2
1.0 BAR
Join Date: Jan 2003
Posts: 422
Re:d-series motor output?
hey dude,
if you have a 5thgen cx, then I hate to say it,
but you have a 70hp engine
do an engine swap before going turbo,
just get a d16z6(its a 125hp vtec)
or if your REALLY poor, get a d15b7(102hp dx engine, wut i've got, hehe).
But that 70hp cx engine is just a frigin waste to do anything to.
And no, you arent going to hit 140whp, or 14's, sorry
if you have a 5thgen cx, then I hate to say it,
but you have a 70hp engine
do an engine swap before going turbo,
just get a d16z6(its a 125hp vtec)
or if your REALLY poor, get a d15b7(102hp dx engine, wut i've got, hehe).
But that 70hp cx engine is just a frigin waste to do anything to.
And no, you arent going to hit 140whp, or 14's, sorry
03-03-2003, 10:48 PM
#3
0.5 BAR
Join Date: Feb 2003
Posts: 106
Re:d-series motor output?
I do believe the Canadian cx models came with the B7 motor, cause i test drove one and it was 16 valve...of course this only applies if our friend here is in Canada. Oh, and flame me if i'm wrong and am talkin outta my ***...
Thread
Thread Starter
Forum
Replies
Last Post
baker_jeff
Hybrid/Tech
2
07-03-2006 01:40 PM
baker_jeff
General Discussion
1
07-03-2006 01:12 PM
