okay i have a min-me setup in my 91 crx si its a d15b8 block with a d16y8 cylinder head i just recently bolted a little turbo setup on it a dsm t25 turbo on a hf manifold with a bmc race adapter plate with a cheap mbc. i got all done bolting it on and ran it a few times the car never over heated it ran fine the first 2 or 3 times i ran it. i took it out the other day and did a few quick pulls with it put it back in the garage and i went and started it today and it began to missfire and the radiator began to hold a good amount of pressure and the run off tank would fill with water. i was thinkin i just blew the headgasket and just wanted to be sure. im going to buy a cometic head gasket and head studs whathead studs do i buy for a mini-me build? what thiknessof head gasket should i buy.

 

How much boost where you runing?

 

did 5 a few pulls then bumped it to 8

 

you running and head studs? I popped 2 before I got some arp's

 

thats what i wanna know what head studs do i buy for a mini-me d15b8 block and d16y8 cylinder head what studs to i get for that setup.

 

isnt it w/e the head u got u get that studs? or some mix-match combo i dont recall..
hope some1 can give u a straight for sure answer...

 

i have a good idea what i have to get i just wanna be sure.

 

y8!!! nog go to tuner toys and they tell you waht you needs fo them gangsta mini me setups and a 1.5 L i like taht !

 

http://shopping.lightningmotorsports...cat=227&page=1