|
CRXdan's turbo d16 holset powered CRX
Heres my junk:
I bought the car bone stock First I added a JRSC. LOL we all know superchargers are gay. Then I threw in a minime. It ran well but I had the desire for boost. I started building a vitara setup and put a junkyard te05h turbo setup on the minime. It ran good @ 6 psi. I swapped in the vitara motor and ran the same setup. Alot slower because of the lower CR. http://photos-h.ak.fbcdn.net/photos-...67439_4947.jpg I then installed a t3/t04e 60 trim with a .48ar housing. Swapped in a 50 trim kept the same .48 housing. slow as ---- again. put a .63 housing in there. trapped 113mph with a 2.284756" exhaust. It was running roughly 11-12 psi. The manifold is ghetto. Now Ive bought a 87 toyota as a daily driver so I can really make the crx into what i want it to be. a 400+whp single slam b series pounder. Basic rundown of setup Holset HY35 4-3" reducer at turbo, everythign else 3" vibrant muffler and resonator w/ vbands Homemade ramhorn mani Tial 38mm Greddy Type S bov stainless downpipe, closed loop wg stainless charge pipes vitara 75.5 arp headstuds TT rods 59300 Comp clutch 6 puck Lightweight flywheel 750cc injectors Walbro 255 http://photos-b.ak.fbcdn.net/photos-...67441_5417.jpg http://photos-c.ak.fbcdn.net/photos-...67442_5847.jpg http://photos-f.ak.fbcdn.net/photos-...867445_629.jpg http://photos-d.ak.fbcdn.net/photos-...67443_6296.jpg |
Re: CRXdan's turbo d16 holset powered CRX
sexy man good job but where is all the jb wled and fluxcore ???
|
Re: CRXdan's turbo d16 holset powered CRX
------ eh. But you know what we really want are panty ripper vids.
|
Re: CRXdan's turbo d16 holset powered CRX
Sweet! Now bring it to me for a dirty raping.
Or do it yourself and post it >:D F.A.B.L.A.D. |
Re: CRXdan's turbo d16 holset powered CRX
Clean work but...
Originally Posted by brine04
you know what we really want are panty ripper vids.
|
Re: CRXdan's turbo d16 holset powered CRX
see ya at mission next year dan. hope i dont blow any more trannys against you. :6
between me, you, and carl, its gonna be interesting to see who run the fastest on the SOHC |
Re: CRXdan's turbo d16 holset powered CRX
between me, you, and carl, its gonna be interesting to see who run the fastest on the SOHC carl will need some serious weight reduction :P im going after the b series. no ripper vids yet because the friggin car isnt finished. i coudl techincally drive it but the interior is all in pieces. maybe itll be done by december or jan of next year. |
| All times are GMT -5. The time now is 04:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands