CRXdan's turbo d16 holset powered CRX
#1
CRXdan's turbo d16 holset powered CRX
Heres my junk:
I bought the car bone stock
First I added a JRSC. LOL we all know superchargers are gay.
Then I threw in a minime. It ran well but I had the desire for boost. I started building a vitara setup and put a junkyard te05h turbo setup on the minime. It ran good @ 6 psi.
I swapped in the vitara motor and ran the same setup. Alot slower because of the lower CR.
I then installed a t3/t04e 60 trim with a .48ar housing.
Swapped in a 50 trim kept the same .48 housing. slow as ---- again.
put a .63 housing in there. trapped 113mph with a 2.284756" exhaust. It was running roughly 11-12 psi. The manifold is ghetto.
Now Ive bought a 87 toyota as a daily driver so I can really make the crx into what i want it to be. a 400+whp single slam b series pounder.
Basic rundown of setup
Holset HY35
4-3" reducer at turbo, everythign else 3" vibrant muffler and resonator w/ vbands
Homemade ramhorn mani
Tial 38mm
Greddy Type S bov
stainless downpipe, closed loop wg
stainless charge pipes
vitara 75.5
arp headstuds
TT rods
59300
Comp clutch 6 puck
Lightweight flywheel
750cc injectors
Walbro 255
I bought the car bone stock
First I added a JRSC. LOL we all know superchargers are gay.
Then I threw in a minime. It ran well but I had the desire for boost. I started building a vitara setup and put a junkyard te05h turbo setup on the minime. It ran good @ 6 psi.
I swapped in the vitara motor and ran the same setup. Alot slower because of the lower CR.
I then installed a t3/t04e 60 trim with a .48ar housing.
Swapped in a 50 trim kept the same .48 housing. slow as ---- again.
put a .63 housing in there. trapped 113mph with a 2.284756" exhaust. It was running roughly 11-12 psi. The manifold is ghetto.
Now Ive bought a 87 toyota as a daily driver so I can really make the crx into what i want it to be. a 400+whp single slam b series pounder.
Basic rundown of setup
Holset HY35
4-3" reducer at turbo, everythign else 3" vibrant muffler and resonator w/ vbands
Homemade ramhorn mani
Tial 38mm
Greddy Type S bov
stainless downpipe, closed loop wg
stainless charge pipes
vitara 75.5
arp headstuds
TT rods
59300
Comp clutch 6 puck
Lightweight flywheel
750cc injectors
Walbro 255
#7
Re: CRXdan's turbo d16 holset powered CRX
between me, you, and carl, its gonna be interesting to see who run the fastest on the SOHC
carl will need some serious weight reduction :P
im going after the b series.
no ripper vids yet because the friggin car isnt finished. i coudl techincally drive it but the interior is all in pieces. maybe itll be done by december or jan of next year.
Thread
Thread Starter
Forum
Replies
Last Post
SpankedYA!
Turbo Parts For Sale
21
12-07-2006 06:59 PM
malcolmtat2
Forced Induction
14
07-31-2006 05:33 PM
BoostingREX
Engine Management
3
08-15-2005 02:30 PM