coolant
 

Anyone with the rev hard 2c kit...

Will I have to run coolant into the turbo? I know that I'll have to run oil, but how do I know if it requires coolant. Sorry for the NOOB question...but I really need your help. :-[

Re:coolant
 

I honestly dont think the greddy/revhard/drag kits have water cooled sections for their turbos. An easy way to tell is just look at the turbo. If their are 4 ports on the center section, it is a water/oil cooled unit. But it should just have 2 ports. oil inlet, and oil return.

If it does have a water cooled section, it really isnt to hard to run the lines into the turbo.

Jeff

Re:coolant
 

Jeff,
Thanks....it just has 2 ports. Can I swap out the fittings to run some sort of fittings to adapt to a braided ss line?

Re:coolant
 

yes i suggest you read all the turbo projects.... back on the main page...

Re:coolant
 

yup, you should be able too, I dont know what the thread pitch is for that turbo inlet (water feed) so you may have to take it to a Screw/nut place and figure out what the fittings are.

Jeff