coolant
02-16-2003, 01:39 PM
#1
0.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 8
coolant
Anyone with the rev hard 2c kit...
Will I have to run coolant into the turbo? I know that I'll have to run oil, but how do I know if it requires coolant. Sorry for the NOOB question...but I really need your help.
Will I have to run coolant into the turbo? I know that I'll have to run oil, but how do I know if it requires coolant. Sorry for the NOOB question...but I really need your help.
02-16-2003, 05:40 PM
#2
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:coolant
I honestly dont think the greddy/revhard/drag kits have water cooled sections for their turbos. An easy way to tell is just look at the turbo. If their are 4 ports on the center section, it is a water/oil cooled unit. But it should just have 2 ports. oil inlet, and oil return.
If it does have a water cooled section, it really isnt to hard to run the lines into the turbo.
Jeff
If it does have a water cooled section, it really isnt to hard to run the lines into the turbo.
Jeff
02-17-2003, 05:01 PM
#5
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:coolant
Originally Posted by b-iza
Jeff,
Thanks....it just has 2 ports. Can I swap out the fittings to run some sort of fittings to adapt to a braided ss line?
Thanks....it just has 2 ports. Can I swap out the fittings to run some sort of fittings to adapt to a braided ss line?
yup, you should be able too, I dont know what the thread pitch is for that turbo inlet (water feed) so you may have to take it to a Screw/nut place and figure out what the fittings are.
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
