colder plugs
are colder plugs necessary if i'm looking at under 200HP and under 10PSI boost?
|
Re:colder plugs
from what i've heard they're not necesary, but you do have to gap your plugs to .028. i ran 1 step colder plugs for safety. call up ngk and ask them for the stock #.
|
Re:colder plugs
whats the worse that will happen? melt or crack the plugs?
|
Re:colder plugs
it's just a good practice to use a step or 2 colder plug when adding boost.
if the plug stays hot then the engine could be more likely to suffer from pre-ignition and/or detonation. but what do i know b/c i haven't boosted my ride yet :-\ |
Re:colder plugs
You can just run stock plugs and gap them down but if you really want colder plugs all you really is 1 step colder.
|
Re:colder plugs
You can also run copper anti seize to lower the plug temp hard to find but it gets the job done.
|
Re:colder plugs
i would run 1 step colder to be safe.
|
Re:colder plugs
6psi-10psi= 1 step colder
11psi-15+psi= 2 step colder This has always worked for me. Its good and cheap insurance to run cooler plugs. If you dont git new plugs, at least gap da plugs. doesnt hurt do retard da timing a bit also. Keeps the detonation gremlins away. I had a spark plug part number and and conversion thread somewhere on here. Too lazy to look for it though. If you need the Denso 1 step colder Part # LMK. You can pick em up @ Autozone. Hope this helps. |
Re:colder plugs
i have heard that you need to gap them tighter. what is the purpose of this? i have mine gapped at .032 i believe,, i know the stock gap is around .04 can anyone explain why you need it closer?
|
Re:colder plugs
closer means less of a "spark" length..i'm assuming that means it will run cooler???
|
Re:colder plugs
I got 1 step coler plugs gapped at .028
it made a difference, cant really explain, but it did help. it was worth the $8 |
Re:colder plugs
Originally Posted by junkyard racer
I got 1 step coler plugs gapped at .028
it made a difference, cant really explain, but it did help. it was worth the $8 |
Re:colder plugs
how do you know it was blowing out? is the reason you gap them closer, i understand it makes the spark length shorter and i understand if you have an aftermarket ignition you can gap it more because the spark is stronger. but does the extra air blow out the sspark. i am interested to know what goes on, and how you know if the spark blows out.
|
Re:colder plugs
^yes, you will misfire if the spark gets blown out, so no spark=no ignition=no power=---- haha
|
Re:colder plugs
go stock gapped down to 28 or 1 step and do the same, either worked fine for me.
|
All times are GMT -5. The time now is 10:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands