Clocking T25
 

Is it possible to clock the exhaust housing on a DSM T25? I know there is a snap ring to clock the compressor, however the guy who TIG'd my manifold fucked it up and didn't weld the flange on at the right angle. My drain/feed is off about 15-20 degrees (not that bad), but that damn compressor outlet that bends off hits the radiator. I could just turn the compressor, but I'd like to kill two birds with one stone. I did seach and could find it. Thanks guys,

Colin

Re: Clocking T25
 

I'm trying to clock my compressor housing right now. I've broken 3 sets of snap-rnig pliers in the past 2 days. Gonna have to order a super heavy duty pair off the net I think.

Re: Clocking T25
 

You need one of these.

http://www.harborfreight.com/cpi/cta...emnumber=45327

This is a life safer when you have turbos that has snap rings to hold the compressor housing on.

Re: Clocking T25
 

You rock. Just ordered a pair. Thanks :o

I went to HF yesterday and they didnt have any of those, so i got a smaller, more easily breakable pair.

Re: Clocking T25
 

Any way to clock the exhaust housing?

Re: Clocking T25
 

4 bolts. 1/2" or 13mm. Loosen them all, then hit it with a rubber hammer to break it free if necessary. Use plenty of PB Blaster