|
Re: chinese t3/t4
lol
|
Re: chinese t3/t4
ssautochrome's head engineer
|
Re: chinese t3/t4
Don't underestimate the power of Ebay, lol.
speedfactory (local shop) runs their ebay SS t3/t4 at 29lbs. Engine: Stock bore, stock sleeve D16Y8 75mm Vitara cast pistons, small-bolt Eagle rods Stock port D16Y8 head with Skunk2 valvesprings & retainers Zex 59300 cam Skunk2 IM and Thermal IM gasket 60mm H22 TB SpeedFactory 2qt. Catch can 9100rpm revlimit Turbo setup: Ebay 57trim T3/T04E .63a/r Mini-ram manifold 3" dp and exhaust Ebay Intercooler Greddy Type-S BOV Greddy Profec B EBC They rock ebay ---- to records. Current Best Performance: 10.4 @ 138mph 10.5 @ 139mph 471whp/356tq @ 29 psi UPDATE: After 2 years we finally had a piston failure due to a possible failed injector on cyl#4. We will be rebuilding another stock sleeved vitara motor with some major changes to the setup in hopes of attaining 510+WHP and low 10's with mid-low 140's trapspeeds. STAY TUNED! |
Re: chinese t3/t4
im still rocking cdm ;D
1.68bar? 24-25psi? unless your taking absolute pressure so 10 psi? |
Re: chinese t3/t4
Originally Posted by BoostForLife
Ebay 57trim T3/T04E .63a/r
|
Re: chinese t3/t4
im pretty sure they are, I was there in woodburn, OR when james blew it. He didn't actually blow, it just didn't run right. They popped off the head and cyl wall #4 was ----.The rebuilt the motor in the parking lot at night. ran another 10.4 pass the next day.
|
Re: chinese t3/t4
The last Ebay 57 trim I saw had a Garrett bearing housing! The unmistakable "A" was etched into it. I think they can't make their own bearing housings, so go with Garrett. I looked inside and it had Chinese internals and didn't have a compressor housing o-ring lol. It's still sitting in a box unassembled as I'd never run one, but I was curious as to what it had inside.
|
Re: chinese t3/t4
Originally Posted by BoostForLife
im pretty sure they are, I was there in woodburn, OR when james blew it. He didn't actually blow, it just didn't run right. They popped off the head and cyl wall #4 was ----.The rebuilt the motor in the parking lot at night. ran another 10.4 pass the next day.
Dude just because a handful come out ok doesnt make them a smart choice. |
Re: chinese t3/t4
Originally Posted by chris
Dude just because a handful come out ok doesnt make them a smart choice. you can get a good look at a T-bone by sticking your head up a butcher's ass..no wait. |
Re: chinese t3/t4
Originally Posted by SloS13
you can get a good look at a T-bone by sticking your head up a butcher's ass..no wait.
|
| All times are GMT -5. The time now is 05:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands