check valves for a gSR? JRSC not turbo
#1
check valves for a gSR? JRSC not turbo
i know this is a turbo forum but i figured i can get some help here. I have a supercharged GSR and i was wondering if i can run CHECK VALVES on my car. THIS IS ONLY FOR A TEMPORARY USE. i cannot afford uberdata or crome etc. at the moment. My car is bogging and i figured i need check valves since all i am running is a FMU that came with the JRSC. Would it work? and exactly where do i hook up the lines to on the TB and the supercharger?
#2
Re: check valves for a gSR? JRSC not turbo
Your map is probably on the throttle body. The check valves would go between the two.
So you will have to get a plate with a nipple on the tb.
Are you getting a cel? The map on the tb is not on the boosted side of the blower.
You might want to dl the install instructions for the jrsc to figure out the lines.
So you will have to get a plate with a nipple on the tb.
Are you getting a cel? The map on the tb is not on the boosted side of the blower.
You might want to dl the install instructions for the jrsc to figure out the lines.
#5
Re: check valves for a gSR? JRSC not turbo
#6
Re: check valves for a gSR? JRSC not turbo
the owner b4 me said a CEL appeared but it went away, so i dont know but its acting up like i need a missing link or w/e.. In every gear or so wen i give it gas it boggs then like it goes , like the motor dumped alot of fuel in. And thats what people have been saying that a missing link/checkvalves will temporary fix PLUS im running a FMU. im very frustrated i see a MAP sensor thingy plug, its black with assy, MAP on it with 2 screws plugged to the TB then theirs 2 nipples with hoses already running off them
#8
Re: check valves for a gSR? JRSC not turbo
i have read the directions i have a damn packet in my hand. Whatever though i changed to some 310cc injectors off a h22. Running a little smoother. But im still bogging when i try to give it gas while driving normally around town.