HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Check My eventual Setup.. (https://www.homemadeturbo.com/forced-induction-7/check-my-eventual-setup-95266/)

91civicsikid 09-11-2008 07:06 PM

Check My eventual Setup..
 
I just figured I would post up my planned set-up and see what you guys think. I'm not asking for an e-dyno or anything. Just wondering if you guys think i should do something else or did anything wrong.

91CivicSi
A6block/z6head
vitara pistons
custom rods
16g or big16g turbo on 20lbs
32mm wastegate (that might be too small but can't find a write up on determining bov size)
Not sure yet what blow off valve or how to figure it out
Y8 intake mani with 680cc injectors
3" cat back from high flow cat
Thinking stage 2 clutch and lightweigh flywheel
A Good tune
Colder spark
New fuel pump (not sure which one)
Intercooler
2.5" charge piping

I think thats it. ;D

igotnothin 09-11-2008 08:06 PM

Re: Check My Setup..
 
sounds good. Make sure you get a "good tune" those cdm tunes are ----.. :P

Hitchhikkr 09-11-2008 11:12 PM

Re: Check My Setup..
 
What sort of power are you looking for? No need for things like 680cc's with a 16g at 20psi. You wont max 450's with that turbo at that level. Also, you probably wont see 300 with that turbo, so to reiterate my point...


rosario4124 09-11-2008 11:53 PM

Re: Check My Setup..
 
pics? :P

91civicsikid 09-12-2008 12:13 AM

Re: Check My Setup..
 

Originally Posted by Hitchhikkr
What sort of power are you looking for? No need for things like 680cc's with a 16g at 20psi. You wont max 450's with that turbo at that level. Also, you probably wont see 300 with that turbo, so to reiterate my point...


http://www.stealth316.com/2-3s-compflowmaps.htm#fm
That web site has compressor maps that show the turbos (16g and big 16g both) have enough flow to support over 300hp
http://www.injector-rehab.com/issg/
I used this site which said I would need 492.19cc's so i don't see how the 450's would be good?

91civicsikid 09-12-2008 12:13 AM

Re: Check My Setup..
 

Originally Posted by rosario4124
pics? :P

Well these are all parts I am working on getting... so pics is going to be hard to pull off.. lol ;)

stillnoturbo 09-12-2008 12:14 AM

Re: Check My Setup..
 
Custom rods? You running some crazy setup or something? Looks like every other vitara slug d-series setup.

TorganFM 09-12-2008 12:45 AM

Re: Check My Setup..
 
Probably custom as in the fjt vitara special rods with the extra 1mm length or whatever.

seerex 09-12-2008 01:08 AM

Re: Check My Setup..
 
Greddy mani, 18g turbo with downpipe for $500 plus shipping buy up.

Smith-02 09-12-2008 02:05 AM

Re: Check My Setup..
 
how is it a 'setup' when its your ------- e-shopping list.

more like dream setup.

91civicsikid 09-12-2008 07:50 AM

Re: Check My Setup..
 

Originally Posted by c0mpl3x
how is it a 'setup' when its your ------- e-shopping list.

more like dream setup.

Sorry.. i changed the title.
Money is slow but I am slowly buying all those parts. Figured I may as well get a second opinion.
I currently have the intake mani, ls throttle body, turbo mani, and a6/z6. Just slowly piecing it all together. :y

Hitchhikkr 09-12-2008 09:47 AM

Re: Check My Setup..
 

Originally Posted by 91civicsikid
http://www.stealth316.com/2-3s-compflowmaps.htm#fm
That web site has compressor maps that show the turbos (16g and big 16g both) have enough flow to support over 300hp
http://www.injector-rehab.com/issg/
I used this site which said I would need 492.19cc's so i don't see how the 450's would be good?

Compressor maps show what the compressor is capable of. Not how effiecent your setup or engine is. You wont make 300 at 20psi on that motor with that turbo. As is, you would be hard pressed to max out 450's at 20psi on a 16g. Dont believe everything you read on the ------- internet.

You still didnt answer the question. Your setup means nothing without a power goal. Or do you just want to know what that setup 'can' do?

If thats the case, it will make around 290hp then the turbine wheel will come apart and shoot thru your exhaust, lodging itself into the bumper of whatever car is unfortunate enough to be behind you at the moment. :3

xternal 09-13-2008 04:55 AM

Re: Check My Setup..
 

Originally Posted by crxvtec91
Greddy mani, 18g turbo with downpipe for $500 plus shipping buy up.

+1 theres a score

seerex 09-13-2008 12:45 PM

Re: Check My Setup..
 

Originally Posted by xternal
+1 theres a score

Thanks, oh and its MINT!!!

91civicsikid 09-15-2008 12:51 AM

Re: Check My Setup..
 

Originally Posted by xternal
+1 theres a score

If only I had the money right now. :'(


All times are GMT -5. The time now is 04:40 AM.


© 2024 MH Sub I, LLC dba Internet Brands