charge pipes - 92-95 civic
 

what are the bends that are needed for the charge pipings? like i know u need 2 90 degrees but what else?

Re: charge pipes - 92-95 civic
 

in general you will need 4 180's and a 45

Re: charge pipes - 92-95 civic
 

just go get a gang of 180s and some straight stuff from Napa. Can't hurt to have bends around for ----.

Re: charge pipes - 92-95 civic
 

its better to have enought. than to be short at the last minute.

Re: charge pipes - 92-95 civic
 

You only need 3 180's and a 45. Also get at least a foot or 2 of straight section and you're good to go. Wait a second, it's all right here O0

http://www.stealthmodeperformance.co...ler-pipe.shtml

Re: charge pipes - 92-95 civic
 

Without knowing anything about your setup, no one can answer your question.

I made a little 3D sketch of what I thought mine would look like. Estimate the bend angles and use a measuring tape to approximate the lengths. It's really not that hard... :8

Re: charge pipes - 92-95 civic
 

right on dudes....yea just buyin a bunch of 180's sounds the best, that shits cheap anyways

Re: charge pipes - 92-95 civic
 

is that website a good one too buy from? like is the ---- straight

Re: charge pipes - 92-95 civic
 

noob

Re: charge pipes - 92-95 civic
 

Yes. He's HMT's president