we couldn't take it to the dyno due to an improper obd conversion harness.

I did dyno my own car with the same T3/T40E turbo that comes in the kit and made 310whp at only 15psi

 

310whp with a 2" bottleneck in the exhaust and and letting off at 6700rpm's. Pretty impressive for a chinese turbo.

 

keep us updated on problems if there are any and longitive of this kit. thanks

 

i see this guy every day and so far no real issues. there was a problem of blowing turbine inlet gaskets. i forgot what he told me he did, but its been fine. i think he just used a thicker gasket

 

really surprized to see an ebay kit workin good .. maybe its not AS bad as ppl make it out to be

 

pretty nice stuff... all looks to go in clean, no major fab problems.

 

evans performance wow. scott? fl3s
looks good any update on this?? what injectors did he use??

 

Very nice picture/write up.

 

any problems ?

 

that kit now has over 30k with no issues. i have recently figured out that those turbos are perfectly fine for stock block setups. they can push higher pressures, but not for long. i ran one at 15psi daily for a while and the trust plate wore out and it started smoking. i threw another one on cause i needed the car and it was fine for a while. i went to the dyno and pushed 31psi with it and a 130 shot on top of that. now it smokes. im thinking thrust plate again. it made over 500whp with vitara pistons though. i held the record for a few days

so, i only recommend these for stock block setups. if you have a built bottom end, its not the way to go.