Here my question do i really a catchcan with 8 psi of boost

 

i have a ground tube and no catch can for 16 i have Greddy on that i got from a friend laying around its shiny aluminum.. lmk if you want it..

 

I have a catchcan But i been reading on other forum's and there are saying if you are running 10psi or under you don't need a catchcan that why i am asking the question here. i want to know what you guys think on this?

 

Make a catch can with a plastic quart of oil, two holes in the side, one hole is for a hose from the valve cover and the other for a hose from the pcv valve. Put a filter on top and shove the quart to the right of the battery. Im running 5-10 psi. It does its job. BTW im almost 99% positive most drag strips dont want you dumping ---- from your pcv and valve cover on the track. They would probably not pass you for inspection.

 

Technically you need a catchcan at any boost... but my last setup i ran 8psi without a catchcan and i had no problems..

 

Any engine would benefit from releasing positive crankcase pressure. Turbo or NA.

 

word and endyne does it to all there motors with a dual set up crankcase windage is a power eating enemy,