yesterday my charge pipe blew off and i ran over it (so it's flat)...and tomorrow the car is going to school where the motor will het tore down and rebuilt also gonna re-do the piping.......so i need to know can i just remove the turbo piping anddrive with the turbo on the motor?? (with oil lines on and still bolted to the down pipe) i dont want to re-adjust everything today...just to remove it all tomorrow (but i have to drive it 12 miles)

 

unhook your charge piping, throw a filter on the throttle body, open your wastegate and call it a day

 

make sure!!!!! you unhook the wg dude. not the vac line to the wg but let it flap around n open so it wont over spool its self.

 

thanks guys

 

i recommend a hammer n duct tape

 

i recomend not doing it

 

the turbo is in the way of your exhaust flow right now mang... ----... that ---- will run bad, and if you drive around with it too long, it can fuckup your engine.

 

I have been told to just unhook and WIRE up the WG and that leaving the turbo spool without charge piping and pressure (I forget exactly) isn't exactly good to do.



JP