bypass wastegate??
I was wantin to know if It was possible to block off my wastegate and jus control the boost by a manual boost controller??
Anybody ever done this??? |
Re: bypass wastegate??
???
What do you mean? A manual boost controller controls the boost through manipulating the wastegate. How would blocking off the wastegate be efficient in anyway? Unless you mean blocking off the internal gate in favor of an external controlled by an EBC. |
Re: bypass wastegate??
you will blow your ----. while driving you wont be able to react fast enough to control the boost. best thing is keep your wastegate and use a manual boost controller to get the boost you want
|
Re: bypass wastegate??
well i got to figure out how to hook the wastegate up......it has a vacuum nipple on top and one on the side.....doesnt one go to the manifold and the other go to the BOV....or to the boostcontroller
|
Re: bypass wastegate??
pretty much. is it an external wastegate? if it is and you want the factory set boost level then just use the one on the side with a hose from the manifold or the compressor housing. if you want a higher psi then you have to run a boost line to the top of the wastegate that has a small amount of boost. that will make the wastegate stay closed till a higher boost level.
if it is an internal wastegate then its the same, but reverse the hoses. if that makes sence then cool, if you need more in depth then take a pic of it and then i can say for sure |
Re: bypass wastegate??
yeah its an external wastegate......
Its not a particular brand.....just a knock off i jus wanna run about 7psi for now I hook my bov to any vaccum source on the mani right |
Re: bypass wastegate??
if the wastegate has a 7psi spring then just connect a line from the intake manifold to the nipple on the side
for you BOV make sure it is a dedicated line to the BOV. dont T it off of anything else. it wont actuate fast enough |
Re: bypass wastegate??
cool I preciate the info man....
I guess ill figure out what kinda spring is in there when its all hooked up and running |
All times are GMT -5. The time now is 04:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands