Bypass valve
 

Ok.The turbo that I'm using has a bypass valve integrated into the turbo itself. See the following pics: https://www.homemadeturbo.com/forum/...;threadid=1041

Well I'm not going to use the Bypass valve, I'm going to use a BOV (for sound of course). Can I just use a Vaccum plug just plug the vaccum source for the bypass valve? Thanx ;D

Re:Bypass valve
 

Just look at reg22 pic, its the same turbo, thanx

Re:Bypass valve
 

Anybody??

Re:Bypass valve
 

yeah, if you don't run vaccum to it, it'll never open. Just make sure that it won't leak under high boost. (don't know if that'll flow that much psi for this to be a problem)

Re:Bypass valve
 

where does that thing dump to when it opens?...i dont see another hole

Re:Bypass valve
 

Probably back into the air inlet.

Stan

Re:Bypass valve
 

Thanx guys ;) Anyway the bypass valve does dump the pressure in the air inlet.

Re:Bypass valve
 

Can you take it off and just cap the hole with a plate?

Re:Bypass valve
 

Yeah, but if I can just plug, and forget about it that would be less of a hassle.

Re:Bypass valve
 

This is a turbo from a Mexican Dodge Stratus 97-99- pretty rare to see one here. Anyways, this is the turbo that will be used on the upgrade for the SRT-4 that Dodge will release next year. This is part of the upgrade that will make 289whp for the SRT-4 with 100 octane.

Mopar performance, TurboXS and a few others make a block off plate for it to add an aftermarket BOV to the system. I saw one on Ebay recently.