Built ZC project update
Here is where the project is right now. AC fits. I need to order my mandrel bends. What would be the differences between the MANDREL-BENT ALUMINIZED TUBING and Heavy-duty 16-gauge T304 stainless steel, both from JC Whitney?
http://www.imagestation.com/picture/...8/fa10bb19.jpg http://www.imagestation.com/picture/...6/fa10bb1b.jpg Rollerwaves Eagle rods ARP head studs SS valves/rebuilt ported head Apexi D series turbo kit (IHI dual BB turbo) ZDYNE gold w/450cc injectors Walbro fuel pump PWR FMIC I'll get the whole list together when the project is done and do a write-up. Comments and advice welcome. |
Re:Built ZC project update
i like it
|
Re:Built ZC project update
For all the nice stuff you've got on that thing, I would go with the stainless...(no chance of rust inside the pipes) as long as they are mandrel bent.
|
Re:Built ZC project update
Originally Posted by Zeusfire69
For all the nice stuff you've got on that thing, I would go with the stainless...(no chance of rust inside the pipes) as long as they are mandrel bent.
|
Re:Built ZC project update
Don't make me feel guilty and broke guys! I guess I shoudn't mention the kaaz lsd and the progress coilovers... It has been a couple years in the making though.
I was thinking about getting the tubing coated the same as the mani to fight corrosion, but I hadn't thought about rust on the inside. Any opinions on where to bump up the charge piping from 2" (from the turbo) to 2 1/4" (IC inlet)? I was thinking of bumping it up just before the U bend that will be coming out that hole in the front framing. Probably doesn't really matter I guess. Any suggestions besides JC whitney for couplers and bends? I already found out that CCA doesn't have 2 1/4" bends... :( |
Re:Built ZC project update
If I were you I would go with aluminized tubing and get it powdercoated. It would probably be cheaper in the long run. jung4g does it, write him and get a cost. his email is fried_rich@hotmail.com
|
Re:Built ZC project update
man...if i had a setup where i put that much time and money in it i would go and spend the extra bucks and get aluminum charge pipes.
Aluminzed and just mild steel are different b/c when its aluminzed it is less likely to rust. straight aluminum will never rust. get the aluminum pipes... |
Re:Built ZC project update
Thanks for the advice guys. Went with SS from Burns Stainless. Still working on the intake mani pipe.
http://www.imagestation.com/picture/...5/f99a8891.jpg http://www.imagestation.com/picture/...e/f99a888d.jpg http://www.imagestation.com/picture/...b/f99a8897.jpg |
All times are GMT -5. The time now is 01:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands