budget d series cast mani from napa
 

heads up for the diy guys, or anyone whos cheap as ---- and cant find an hf mani

http://www.napaonline.com -> PartsPROSE Catalog -> Part: ATM 1802906

Exhaust Manifold


Front
Part: ATM 1802906
Product Line: Altrom

Price : 80.39

and if you have a friend at the register, you can get it MUCH cheaper.

its designed to fit a 96-98 civic (d16y) and is designed to use an aftermarket cat that bolts to the manifold.

bust out the drill and dremel, and you got a manifold.


http://i37.tinypic.com/v4qjo1.jpg

http://i38.tinypic.com/np0rp1.jpg

http://i35.tinypic.com/i5rw2s.jpg

Re: budget d series cast mani from napa
 

nice find

Re: budget d series cast mani from napa
 

I want to se that bitch mounted up :y

Re: budget d series cast mani from napa
 

Cut, Drill, tap, and call it a day.

Re: budget d series cast mani from napa
 

they are built better then stock too. i had a stock mani crack and got one of them. it's still on the car with over 100k on that mani. i bought the whole thing though not just the top. i got the cat with it.

Re: budget d series cast mani from napa
 

Now that's HMT, sweet :)

Re: budget d series cast mani from napa
 

is the heatsheild bolted to the mani? is there room to fab a external wastegate?

Re: budget d series cast mani from napa
 

yeah the heat shield is bolted to it, and if you can put a external gate on a hf mani then you can put one on here.

Re: budget d series cast mani from napa
 

can you get a 14b on that flange. i was looking fore a hf but that look more like what i wont.

Re: budget d series cast mani from napa
 

if you can't fit a 14b flange you can always buy an adapter plate or make your own.