budget d series cast mani from napa
 

heads up for the diy guys, or anyone whos cheap as ---- and cant find an hf mani

http://www.napaonline.com -> PartsPROSE Catalog -> Part: ATM 1802906

Exhaust Manifold


Front
Part: ATM 1802906
Product Line: Altrom

Price : 80.39

and if you have a friend at the register, you can get it MUCH cheaper.

its designed to fit a 96-98 civic (d16y) and is designed to use an aftermarket cat that bolts to the manifold.

bust out the drill and dremel, and you got a manifold.


http://i37.tinypic.com/v4qjo1.jpg

http://i38.tinypic.com/np0rp1.jpg

http://i35.tinypic.com/i5rw2s.jpg

Re: budget d series cast mani from napa
 

nice find

Re: budget d series cast mani from napa
 

I want to se that bitch mounted up :y

Re: budget d series cast mani from napa
 

Cut, Drill, tap, and call it a day.

Re: budget d series cast mani from napa
 

they are built better then stock too. i had a stock mani crack and got one of them. it's still on the car with over 100k on that mani. i bought the whole thing though not just the top. i got the cat with it.

Re: budget d series cast mani from napa
 

Now that's HMT, sweet :)

Re: budget d series cast mani from napa
 

is the heatsheild bolted to the mani? is there room to fab a external wastegate?

Re: budget d series cast mani from napa
 

yeah the heat shield is bolted to it, and if you can put a external gate on a hf mani then you can put one on here.

Re: budget d series cast mani from napa
 

can you get a 14b on that flange. i was looking fore a hf but that look more like what i wont.

Re: budget d series cast mani from napa
 

if you can't fit a 14b flange you can always buy an adapter plate or make your own.

Re: budget d series cast mani from napa
 

Nice find! I know STD/HF manifolds are getting harder and harder to come by as time goes on, this looks like a good replacement. I'm about to cross reference the number at work and see if we can order them, 20% auto zone employee discount ftw!

Re: budget d series cast mani from napa
 

Paging Loki to this thread, paging Loki

Price check isle 4, price check.

Re: budget d series cast mani from napa
 

i know that autozone sells something like that, but i don't remember if it was the same or not.
i got a friend that works there...

Re: budget d series cast mani from napa
 

how would the oil return be with this setup?
danz mount this bad boy so we can see how low a turbo would sit.

Re: budget d series cast mani from napa
 

sweet ---- ill have to tell my friend bout this hes going to be doing a turbo d soon

Re: budget d series cast mani from napa
 

i dont have a plan to buy one of these any time soon. i have a splog waiting to be used, and currently use the HF mani.

my only concern would be the turbo might hang a bit low, then again i use my HF with a 3/4in adapter without issues

but any of you nogs can go buy one and tell us how it works out

Re: budget d series cast mani from napa
 

How much less is it if you have an employee discount?

Re: budget d series cast mani from napa
 

i got a napa nor cal warehouse here in sac... and my commercial attc.... good ----. Maybe i will do one just for ---- and giggles

Re: budget d series cast mani from napa
 

when i get a HARD hookup i can usually knock about 20-40% of the price off

Re: budget d series cast mani from napa
 

There's cast manifolds on ebay for d series w/t3/t4 for $99. and b series for $68. ready to go

http://cgi.ebay.com/ebaymotors/civic...mZ380077435016
http://cgi.ebay.com/ebaymotors/Honda...mZ370104908254
I don't know the sellers, but If I needed a manifold I'd buy one of these.

Re: budget d series cast mani from napa
 

holy ---- theres cast manifolds on ebay?!?! you are ------- GOD BITCH :-*

Re: budget d series cast mani from napa
 

Good nog price is $75 :P with 9 that I could see overnight.

Re: budget d series cast mani from napa
 

The y7 manifold is a total failure from Honda.

Re: budget d series cast mani from napa
 

Totally good find. Perfect for a sleeper look, I'd say.

Re: budget d series cast mani from napa
 

Thanks, I wish we got it cheap like the Americans. :1

Re: budget d series cast mani from napa
 

------ what, call lordco. they carry the whole Altrom line. and lordco counter staff give discounts like its herpes

Re: budget d series cast mani from napa
 

That's why you hack off the cat and weld on a flange instead. My y7 manifold. :6
http://img.photobucket.com/albums/v1...f/8dab67e6.jpg

Re: budget d series cast mani from napa
 

I know I have done numerous manifolds for boost with the y7 manifold. The fact honda threw a manifold on a car that cracks within 5 years is wild.

Re: budget d series cast mani from napa
 

i have a Y7 mani i was planning on doign this too, but if it cracks i guess ill just goto napa or vatozone and get a new one.

Re: budget d series cast mani from napa
 

Call Lordco, and see if they give it to you cheaper then Loki. We buy ---- from Lordco cause they have it in stock, and from loki, when it comes in return it to Lordco as Staff price is more $$$ then Loki's good nog price.

Re: budget d series cast mani from napa
 

damn lordco. wants $100 for it. $166 list. yikes

Re: budget d series cast mani from napa
 

The crack happens on stock cars. If you weld the flange on nice no worries.

Re: budget d series cast mani from napa
 

Is that with a discount? holy ----, hahahahahahahahahahahahahaa.

Re: budget d series cast mani from napa
 

Neat find, i guess if you want a cast mani but dont want a t3 flange thats an option. Just doesnt seem worth it when you can buy a cast t3 mani for $99.

Re: budget d series cast mani from napa
 

If anybody wants one of these manifolds i can get you one shipped to your door for 83.00 my price is not the same as Danz so thats why its little more. i may use one myself...