Broke backplate thing (PIC)
1 Attachment(s)
When i remove the backplate from turbo i see there is a part of it broke.
This what kind of problem can cause to the turbo if i use as it. Pic attached |
Re: Broke backplate thing (PIC)
Get a new backplate. It'll leak like a ----------er among other things if you ran it. You can get them for cheap from G-Pop or maybe a sponsor on this site. I may have one for you too depending on what it is.
|
Re: Broke backplate thing (PIC)
That's right where the piston seal rubs, IIRC. Old worn out turbos can have that issue.
W/o replacing it, it will leak. The problem is the piston seal may be bad too, so with a new backplate, it might still leak. Post a picture of the CHRA that it mates to, shaft and all. If the ring is fine (impossible to tell visually), a backplate would make it good as new, assuming you marked the exact position the wheel & nut were on the shaft. |
Re: Broke backplate thing (PIC)
2 Attachment(s)
Previous pic was from the Volvo turbo.
This new pics are from the Nissan AR.60 that have the same problem, even whorst because all the ring from the backplate dissapeared Here is what i got Attachment 9505 Attachment 9506 |
Re: Broke backplate thing (PIC)
I think i need another back plate
|
All times are GMT -5. The time now is 06:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands