BOV not opening..
Alright so I have the greddy type RS. It worked great with the previous setup (14b).. Now I switched to a t3/t4 and external wastegate and its not working all of a sudden. I never messed with the adjustment until tonight and loosened it all the was out so its pretty easy to open.. Nothing. I changed vacuum lines and still nothing.. Any clue anyone?
|
Re: BOV not opening..
maybe you tightened it. or your vacuum source is bullshit.
its also possible you have a terrible boost leak. but, judging by your post, you know nothing about anything so in that case drink bleach and die. |
Re: BOV not opening..
Just letting people know the changes made even though it could be irreverent. The vacume source has stayed the same. No leaks. No I didnt tighten it. I said I loosened it. Thats after I seen it wasnt opening. Could it be its possibly not making enough psi to open? 5.63 pound spring and reading at a little under 6.
|
Re: BOV not opening..
it should still open, check for boost leak
|
Re: BOV not opening..
Boost leak huh. I will check it out tomorrow. Any other suggestions?
|
Re: BOV not opening..
Originally Posted by 93gtturboslut
maybe you tightened it. or your vacuum source is bullshit.
its also possible you have a terrible boost leak. but, judging by your post, you know nothing about anything so in that case drink bleach and die. the reason he ask the question its because he dont know, so why the dickhead response? check you vac lines, also retighten the bov a little, you might have it too lose where its is not closing and preventing you from building boost, get your bov vac from the intake mani not the charge pipe or TB. try those if it dont work get a different bov. also check to make sure your wastegate is not leaking and preventing boost |
Re: BOV not opening..
Originally Posted by imburne
Just letting people know the changes made even though it could be irreverent. The vacume source has stayed the same. No leaks. No I didnt tighten it. I said I loosened it. Thats after I seen it wasnt opening. Could it be its possibly not making enough psi to open? 5.63 pound spring and reading at a little under 6.
|
Re: BOV not opening..
Originally Posted by kamilk69
bov dont work on how much psi you have they work on vacum, a more vacum the easier the bov will open.
look at the plunger when ur car's idling, if the screw is loose it should be open a little bit. |
Re: BOV not opening..
About the vac lines all I can say is they are almost all replaced with a tad bit bigger. I just dont see why it would effect it. Vacume source is from the intake.. Its building boost because I can hear the fluttering of the blades turning backwards.. (compressor surge) .. Plus I seen it on the gauge when I had on there temporarily.
|
Re: BOV not opening..
igot the same problem...my greddy works fine with the setscrew halfway with only the smaller spring..but my ebay rfl is doin the same problem..and ive got 20 vacuum at idle with bre dataloggin
|
All times are GMT -5. The time now is 10:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands